Notice SOLAC HU1050 disponible gratuitement après inscription

Extrait de la notice

appliance with wet hands when in operation. •When unplugging the appliance, do not pull on the power cord or the appliance. •Never leave the appliance outdoors exposed to the elements. •The appliance and its power cable must not be placed under water in any case. •Do not fill it with hot water. b WARNING!!: When you want to dispose of the appliance, NEVER throw it in the bin. Take it to your nearest RECYCLING POINT or waste collection centre for treatment. You will thus be helping to take care of the environment. 2MAIN COMPONENTS 1Water tank 2Mist outlet 3Ioniser function on/off switch 4Pilot light 5Mist on/off switch 6Ionised air outlet 7Pilot light showing that the ioniser function is active 8Water level float 9Transducer 10Internal water tank 11Brush 3OPERATION AND USE 1Separate the water tank (1) from the base, turn it over and remove the cap from the bottom, turning it anticlockwise. Fig.1. Fill with cold water; do not fill completely. 2Replace the plug, aligning the notches on the tank with the grooves on the cap, and turn it clockwise. Make sure it is well closed. 3Turn the tank over and place it on its base making sure it fits perfectly. 4When placing the water tank (1) back on the base, a part of the water it contains enters the space between the tank and the body (10); this is part of the normal operation of the appliance and does not entail any risk. Libro HU1050.book Page 11 Monday, September 10, 2007 10:45 AM12MAINTENANCE AND CLEANING 5Plug the adapter into the mains socket. Use the on / off switch (5) to select the desired flow of mist. Fig. 2. The humidifier starts working and the pilot light (4) comes on. 6When you want to deactivate the mist function, use the on/off switch (5) and return it to the original...