emote commander or set “A.SCRL-ON” (page 11). Tip Displayed item will differ, depending on the disc type and recorded format. For details on MP3, see page 14; ATRAC CD, see page 15. Repeat and shuffle play 1During playback, press (3) (REP) or (4) (SHUF) repeatedly until the desired setting appears. *When an MP3/ATRAC CD is played. To return to normal play mode, select “REP- OFF” or “SHUF-OFF.” Radio Storing and receiving stations Caution When tuning in stations while driving, use Best Tuning Memory (BTM) to prevent an accident. Storing automatically — BTM 1Press (SOURCE) repeatedly until “TUNER” appears. To change the band, press (MODE) repeatedly. You can select from FM1, FM2, FM3, MW or LW. 2Press and hold (BTM) until “BTM” flashes. The unit stores stations in order of frequency on the number buttons. A beep sounds when the setting is stored. Storing manually 1While receiving the station that you want to store, press and hold a number button ((1) to (6)) until “MEM” appears. The number button indication appears in the display. Note If you try to store another station on the same number button, the previous stored station will be replaced. Tip When a RDS station is stored, the AF/TA setting is also stored (page 9). Receiving the stored stations 1Select the band, then press a number button ((1) to (6)). With the card remote commander To select preset stations, press M or m. Tuning automatically 1Select the band, then press (SEEK) +/– to search for the station. Scanning stops when the unit receives a station. Repeat this procedure until the desired station is received. Tip If you know the frequency of the station you want to listen to, press and hold (SEEK) +/– to locate the approximate freque...