Notice SONY CMT-MD1 disponible gratuitement après inscription

Extrait de la notice

ions You can preset the 20 for FM and 10 for AM stations. To tune in the desired station 1Press TUNER/BAND repeatedly until the band you want appears in the display. Pressing TUNER/BAND turns the power on. Each time you press the button, the band changes as follows: FM ˜ AM 2Press TUNING MODE on the remote repeatedly until “AUTO” appears. (P1/u = 0 – p ) + + (Pp g + – 6 FUNCTION 13 =+ (Pp 1 / u –+ –+ – + =+ (Pp 5,7 44,6 2 STEREO/MONO LEVELSYNC- DBFB AUTO .75HM8FMz 3Press TUNING +/–. The frequency indication changes and scanning stops when the system tunes in a station. “TUNED” and “STEREO” (for a stereo program) appear. When you want to stop scanning, press TUNING MODE on the remote. To preset the station 4Press EDIT, then +/– on the remote repeatedly until “Frq-Memory ?” appears. LEVELSYNC- DBFB TUNEDAUTO M-eomqFrry? continued10 The preset number 5Press ENTER/YES on the remote. 6Press +/– on the remote to select the preset number you want. LEVELSYNC- DBFB TUNED .75HM8Mz1F 7Press ENTER/YES on the remote. The station is stored. 8Repeat steps 1 through 7 to preset other stations. To tune in a station manually Press TUNING MODE on the remote repeatedly until “MANUAL” appears in step 2, then press TUNING +/– to tune in the station and continue from step 4. To change the preset number Start again from step 1. To change the AM tuning interval (except for European model) The AM tuning interval is factory-set to 9 kHz (10 kHz in some areas). To change the AM tuning interval, tune in any AM station first, then turn off the power. While holding down the FUNCTION button, turn the power back on. When you change the interval, all the AM preset stations are erased. To reset the interval, rep...