Notice SONY NV-U92 disponible gratuitement après inscription

Extrait de la notice

on may deteriorate if the unit is installed near a heated or heat-reflecting windscreen. •Depending on the conditions, the car’s current position or the movement may not be accurately displayed. This, however, will be corrected as soon as the GPS signal reception resumes. •This function is available only during route guidance. On the software Read the “END-USER LICENSE AGREEMENT” carefully before use. Location of controls Refer to the pages listed for details. a?/1 (on/standby) button 6 To turn the unit on/off. bScreen buttons 9 cDisplay window/touch screen dAuto dimmer sensor Detects ambient light and automatically adjusts the display brightness. eCHG (battery charge) indicator Lights up in red while charging, and changes to green when fully charged. When the adapter is disconnected, the indicator goes off. fCradle connector gRESET button 15 hDC IN 5V jack To connect to the car battery adapter or AC adapter*. iUSB jack 11 To connect to a computer with the USB cable. jOPEN/RELEASE button To open the built-in GPS aerial or remove the unit from the cradle. For details, see the supplied “Read This First” (Installation Manual). kNameplate lBuilt-in GPS aerial mSpeaker Outputs guidance and warnings. nMemory Stick access indicator oMemory Stick Duo slot For “Memory Stick Duo” insertion for functional expansion. pHeadphone jack This jack cannot be used as an audio output terminal. *Optional accessory6 Turning the unit on/off To turn the unit on/off Press ?/1 (1). Note If you do not use the unit for a long term, the built-in battery may be depleted, and the unit will not turn on. In such a case, connect the car battery adapter and charge the unit. After you charge the unit, it may take time to receiv...