Notice SONY SA-W10 disponible gratuitement après inscription

Extrait de la notice

may provide better bass reproduction in certain listening environments (depending on the type of front speakers, the position of the woofer and the adjustment of the cut-off frequency). It may also change the expanse and tightness of sound, and effect the feeling of sound field. Select the setting that provides the sound you prefer when listening in your normal listening position. 5 Repeat steps 2 to 4 to adjust for your preference. Once you have adjusted the woofer to the settings you desire, use the VOLUME control on the amplifier to adjust the volume of the woofer with that of the other speakers. You don’t need to adjust the woofer settings when you change the volume level of the amplifier. LEVELCUT OFF FREQPHASE S MINMAX50Hz200Hzø NORMALø REVERSE POWERLEVELCUT OFF FREQPHASE Basic Operations 50Hz200Hz 1 2 3 4 Note If the sound distorts when you turn on the bass reinforcement from your amplifier (such as, DBFB, GROOVE, the graphic equalizer, etc.), turn off the bass reinforcement and adjust the sound.1/10-11_SAW10.11EN 3-810-424-12(1) 10EN Additional Information Troubleshooting If you experience any of the following difficulties while using the woofer, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer. There’s no sound. /Check that this woofer and components are connected correctly and securely. /Rotate LEVEL clockwise to turn the volume up. The sound has suddenly stopped. /The speaker cords may have short-circuited. Connect the cords properly. The sound is distorted. /The input signal is imperfect. /The input signal level is too high. Severe hum or noise is heard. /Connect the ground wire of the turntable properly. /The contacts between the plu...