Notice SONY STR-DE245 disponible gratuitement après inscription

Extrait de la notice

touching each other due to excessive removal of insulation Front speaker (R) Front speaker (L)Receiver SPEAKERS REAR LR CENTER ReceiverRear speaker (R) Rear speaker (L)Center speaker ReceiverActive Woofer FRONT SPEAKERS – RL + – FRONT SPEAKERS RL + After connecting all the components, speakers and AC power cord, output a test tone to check that all the speakers are connected correctly. For details on outputting a test tone, refer to ”Adjusting the speaker volume”, on page 17. If you have connected rear speakers, be sure to press the 5.1 CH/DVD button and turn off sound field on the receiver before outputting a test tone so that the tone is output individually from the left and right rear speakers. If no sound is heard from a speaker while outputting a test tone or a test tone is output from a speaker other than the one whose name is currently displayed on the receiver, the speaker may be short-circuited. If this happens, check the speaker connection again. Active woofer Note Do not connect any other component. To listen to the speakers Make sure that you set the SPEAKERS button to ON. If your TV monitor uses separate speakers You can connect one of them to the SPEAKERS CENTER terminals for use with Dolby Pro Logic Surround sound (see page 16). Where do I go next? To complete your system, go to “AC Hookups” on next page. SPEAKERS FRONT RL SUB WOOFER AUDIO OUT INPUT9US Getting Started AC Hookups Setting the voltage selector (except for Singapore, Malaysia, Canada and Australia models) Check that the voltage selector on the rear panel of the player is set to the local power line voltage. If not, set the selector to the correct position using a screwdriver before connecting the AC power cord to a wall outle...