Notice SONY VPL-CS21 disponible gratuitement après inscription

Extrait de la notice

POWERSAVINGTEMP/FANLAMP/COVER The following three connecting options are available: aComposite video (phono plug) cable (not supplied) bS video (Mini DIN 4-pin) cable (not supplied) cComponent (D-sub 15-pin y 3 × phono plug) cable (not supplied) A/V connecting adaptor (supplied) a b c Audio (stereo audio connecting cable (not supplied))* Use a no-resistance cable. *Connect only when you want to output the audio from the speaker of the projector.6Projecting Before connecting the equipment, plug the AC power cord into a wall outlet. aPress the I/1 (on/standby) key. bTurn on the computer connected to the projector. cPress the INPUT key to select the input source. dWhen the computer is connected, set it to output the video signal to only the external monitor. Projecting ENUAC IN COVER Fn FxF7 PowerOn/Stand by2211 4433INPUTor and Input A Video S-Video7Projecting aAdjust the position of the picture. bAdjust the size of the picture. cAdjust the focus, as required. aPress the I/1 (on/standby) key. bWhen a message appears, press the I/1 (on/standby) key again. cUnplug the AC power cord from the wall outlet after the fan has stopped running and the ON/STANDBY indicator has lit in red. The internal circuitry of the Off & Go function may cause the fan to continue to operate for a short time even after the I/1 key is pressed to turn off the power and the ON/STANDBY indicator changes to red. Adjusting the Projector TILT ZOOM–+ FOCUS–+ 221133FOCUSAUTO or Turning off the Power Notes 11 22338Replacing the Lamp Replacing the Lamp The lamp used as a light source is a consumable product. Thus, replace the lamp with a new one in the following cases. •When the lamp has burnt out or dims • “Please replace the Lamp.” appea...