Notice SONY VPL-ES5 disponible gratuitement après inscription

Extrait de la notice

rks and registered trademarks are trademarks or registered trademarks of their respective holders. In this manual, ™ and ® marks are not specified. Notes3 GBNotes on Use Notes on Use Do not block ventilation holes (exhaust/intake). If they are blocked, internal heat may build up and cause fire or damage to the unit. Check the positions of the ventilation holes shown in the following illustrations. For other precautions, read the separate “Safety Regulations” carefully. Note on the Ventilation Holes 4 2 aVentilation holes (exhaust) bRemote control detector cIndicators dVentilation holes (intake) Top/Right Side/Front Rear/Right Side/Bottom GBGB 4Projecting Projecting When you connect the projector, make sure to: •Turn off all equipment before making any connections. •Use the proper cables for each connection. •Insert the cable plugs firmly. When pulling out a cable, be sure to pull it out from the plug, not the cable itself. •Refer also to the instruction manual of the equipment to be connected. To connect a computer (Analog) aPlug the AC power cord into a wall outlet. bConnect the projector to a computer. For stereo audio connection, connect the stereo audio connecting cable to following connectors: VPL-EX5/ES5: INPUT A/VIDEO IN AUDIO connector VPL-EW5: INPUT A AUDIO connector VPL-EX50: INPUT A/B AUDIO connector Connecting the Projector 11 22 VPL-EX50 HD D-sub 15 pin cable (supplied) Stereo audio connecting cable (not supplied) (Use a no-resistance cable.) Note5 GBProjecting To connect a computer (Digital) or video equipment (Digital) (VPL-EW5 only) aPlug the AC power cord into a wall outlet. bConnect the projector to a computer or video equipment. •Be sure to use the HDMI cable with an HDMI logo. •T...