Notice SONY VPL-HS2 disponible gratuitement après inscription

Extrait de la notice

the screen to the center of the projector’s lens when you place the projector on the side (when you use projection distance b) When projecting using both “Side Shot” and “V Keystone” adjustments Position the projector with the lens end within the area in the illustration, by using the values a to f in the table below as a guide. Unit: m (feet) Tip The table shows the distances when projecting the conventional video and 1080i format signals. Distances used for projecting a 720p format signal and computer’s signal are shown on page 34. Note When projecting with the optional Conversion Lens attached, the values a, b, e and f are slightly different from those in the table. When projecting using “Side Shot” adjustment only Position the projector with the lens end within the area in the illustration, by using the values a, b, c and d in the table below as a guide. Unit: m (feet) Tip The table shows the distances when projecting the video signals. Distances used for projecting a 1080i/720p format signal and computer’s signal are shown on page 35. Note If you project the picture using “Side Shot” only, set “V Keystone” in the INSTALL SETTING menu to “Manual,” and adjust the level to “0.” When projecting from the center You can change the projection angle using the adjuster. (1 page 13) Position the projector with the lens end within the area in the illustration, by using the values a and b in the table below as a guide. Unit: m (feet) 2Project an image on the screen and adjust the picture so that it fits the screen. (1 page 12) To project an image, connect video equipment to the projector. (1 page 10) Screen size (inches) 406080100120150 a1.6 (5.2) 2.5 (8.2) 3.3 (10.8) 4.2 (13.8) 5.0 (16.4)...