Notice SONY VPL-HS3 disponible gratuitement après inscription

Extrait de la notice

0) 0 (0) 0 (0) 0 (0) Screen size (inches) 406080100120150 a1.2 (3.9) 1.7 (5.6) 2.2 (7.2) 2.8 (9.2) 3.4 (11.2) 4.2 (13.8) b1.3 (4.3) 1.9 (6.2) 2.5 (8.2) 3.1 (10.2) 3.7 (12.1) 4.6 (15.1) c-0.2 (-0.7) –0.3 (–1) –0.4 (–1.3) –0.6 (–2) –0.7 (–2.3) –0.9 (–3)Connections and Preparations 9 GBStep 2: Connecting the Projector Tip The table shows the distances when projecting the conventional video signals. Distances used for projecting a 1080i/720p format signal and computer’s signal are shown on page 40 . When projecting from the center (1 page 19) You can change the projection angle using the adjuster. (1 page 16) Position the projector with the lens end within the area in the illustration, by using the values a and b in the table below as a guide. Unit: m (feet) For “Floor installation example”, see page 41. 2Project an image on the screen and adjust the picture so that it fits the screen. (1 page 14) To project an image, connect video equipment to the projector. (1 page 9) Note When using a screen with an uneven surface, stripes pattern may sometimes appear on the screen depending on the distance between the screen and the projector or the zooming magnifications. This is not a malfunction of the projector. When making connections, be sure to do the following: •Turn off all equipment before making any connections. •Use the proper cables for each connection. •Insert the cable plugs properly; plugs that are not fully inserted often generate noise. When pulling out a cable, be sure to pull it out from the plug, not the cable itself. •Refer to the operating instructions of the connected equipment. •When you connect your projector to PJ MULTI, select the input signal with...