Notice SONY VPL-VW100 disponible gratuitement après inscription

Extrait de la notice

at or smoke sensor Malfunction of the sensor may occur. Very dusty and extremely smoky locations Before Setting Up the Projector 20 cm : 20 cm ExhaustGB 14Step 1: Installing the Projector Improper use Do not do any of the following while using the projector. Blocking the ventilation holes. Tip For details on the location of the ventilation holes (intake or exhaust), see “Location of Controls” on pages8 to10. Tilting front/rear and left/right Avoid using the projector tilted at an angle of more than 15 degrees. Do not install the projector anywhere other than on a level surface or on the ceiling. Improper installation of the projector may cause a malfunction. When installing the unit at altitudes When using the projector at an altitude of 1,500 m or higher, set “High Altitude Mode” in the Installation menu to “On.” (1 page 52) Failing to set this mode when using the projector at high altitudes could have adverse effects, such as reducing the reliability of certain components. Ventilation holes (intake) Ventilation holes (exhaust) 15º or more 15º or more 15º or more 15º or more 15º or more15 GBStep 1: Installing the Projector Connections and PreparationsThe installation distance between the projector and a screen varies depending on the size of the screen. 1Determine the installation position of the projector and screen. You can obtain a good quality picture if you position the projector with the center of the lens within the areas indicated in the gray areas in the illustration. Use the values a, b and c in the table on page 16 as a guide. a:Minimum projection distance between the screen and the center of the projector’s lens b:Maximum projection distance between the screen and the center of the p...