he list. When the Quality Bar is at its highest level, press the RED ( )button on the remote to Scan the Satellite. To view a channel, press the OK button in the Viewing Mode (clear screen) and select any channel. To view $ (Scrambled) channels, a CAM (Decoder) and a viewing card are required. How to Install a New Satellite (Fixed Non-Motorised System)How to Install a New Satellite (Fixed Non-Motorised System) Press the MENU button on the remote and press the OK button on Installation. Press OK on Satellite Setup and OK again to display a Satellite List. Select a Satellite (e.g. Hotbird 13E and Astra 19.2E) and press the YELLOW button on the remote for each Satellite to Save. Press the EXIT button on the remote to exit the list. Go to DiSEqC Switching and select a Satellite (e.g. Hotbird 13E as Number 1 and Astra 19.2E as Number 2). When the Quality Bar is at its highest level for each Satellite, press the RED ( )button on the remote to Scan. To view a channel, press the OK button in the Viewing Mode (clear screen) and select any channel. To view $ (Scrambled) channels, a CAM (Decoder) and a viewing card are required. If the above installation was not successful, change the DiSEqc Switching number, e.g. Hotbird 13E as Number 2 and Astra19E as Number 1. How to Setup a Monoblock or DiSEqC Switch (up to 4 LNBs / Dishes)How to Setup a Monoblock or DiSEqC Switch (up to 4 LNBs / Dishes) Press the MENU button on the remote and press the OK button on Installation. Press OK on Satellite Setup and OK again to display a Satellite List. Select a Satellite (e.g. Hotbird 13E and Astra 19.2E) and press the YELLOW button on the remote for each Satellite to Save. Press the EXIT button on the remote to exit the list. Press the EXI...