Notice TOSHIBA 32WL56P

Notice TOSHIBA 32WL56P disponible gratuitement après inscription

Accédez à la notice du TOSHIBA 32WL56P en adhérant à la communauté.

Notice d’utilisation de votre TOSHIBA 32WL56P. La notice vous renseigne sur l’utilisation, donne des solutions aux problèmes d’entretien, de fonctionnement et d’assistance pour votre 32WL56P.

Notices - manuels - modes d'emploi disponibles pour TOSHIBA 32WL56P après inscription au groupe d'entraide

Aperçu de la notice

Extrait de la notice

ub 15p connector Mini D-sub 15p connector Component video connector (not supplied) When connecting to equipment with component video output it will be necessary to connect an audio cable to the PC/HDMI socket. ? Component video supports 480i, 480p, 576i, 576p, 720p and 1080i signals. ? Connect the PC cable from the computer to the PC terminal on the back of the television. Press the Bto selectPC mode. The following signals can be displayed: VGA:640 x 480/60 Hz (VESA 480-60) SVGA: 800 x 600/60 Hz (VESA 600-60) XGA: 1024 x 768/60 Hz (VESA 768-60) IMPORTANTNOTE: The 27WL model will display XGA but it will not be to the VESA standard. PLEASENOTE: Some PC models cannot be connected to this television. An adaptor is not needed for computers with a DOS/V compatible mini D-sub 15p terminal. A band may appear at the edges of the screen or parts of the picture may be obscured. This is due to the strength of the signal, it is not a malfunction. When PC input mode is selected some of the television’s features will be unavailable e.g. Manual settingin the SETUPmenu, Colour, Tint, DNRand Black Stretchin the Picture settingsmenu. Signal information for Mini D-sub 15p connector Pin assignment for RGB/PC terminal Pin. No.Signal namePin No.Signal name 1R (PR*)9NC 2G (Y*)10Ground 3B (PB*)11NC 4NC (not connected)12NC 5NC13H-sync 6Ground14V-sync 7Ground15NC 8Ground * Component video gEnglish 8 Side connections and controls If the red LED is unlit check that the mains plug is connected to the power supply. If the picture does not appear press a number button on the remote control, it may take a few moments. To put the television into Standby press ion the remote control. To view the television press iagain. The picture may take a...

En cours...