Notice TOSHIBA 32WL66Z disponible gratuitement après inscription

Extrait de la notice

e decoder. ? IN/OUT MEDIA REC. TV SAT gEnglish 7 Connecting a computer Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket. When PC input mode is selected some of the television’s features will be unavailable e.g. Manual settingin the SETUPmenu, Colour, Tint, DNRand Black Stretchin the Picture settingsmenu. Signal information for Mini D-sub 15 pin connector Pin assignment for RGB/PC terminal Pin. No.Signal namePin No.Signal name 1R9NC 2G10Ground 3B11NC 4NC (not connected)12NC 5NC13H-sync 6Ground14V-sync 7Ground15NC 8Ground the back of your television Computer Audio cable for PC to television connection (not supplied) Conversion adaptor if required (not supplied) RGB PCcable (not supplied) Mini D-sub 15 pin connector Connect the PC cable from the computer to the PC terminal on the back of the television. Connect the audio cable to the PC/HDMI1 Audio socket on the back of the television. Select PCfrom the PC/HDMI1 audiooptions in the AVconnection menu located in the SET UP menu. Press the Bto selectPC mode. The following signals can be displayed: VGA:640 x 480/60 Hz (VESA) SVGA: 800 x 600/60 Hz (VESA) XGA: 1024 x 768/60 Hz (VESA) SXGA: 1280 x 1024/60 Hz (VESA) IMPORTANT NOTE:SXGA will display but it will not be to VESA standard. PLEASENOTE: Some PC models cannot be connected to this television. An adaptor is not needed for computers with a DOS/V compatible mini D-sub 15 pin terminal. A band may appear at the edges of the screen or parts of the picture may be obscured. This is due to scaling of the picture by the set, it is not a malfunction. gEnglish 8 Controls and input connections If the REDLED is unlit check that the...