Notice TOSHIBA 46WM48P disponible gratuitement après inscription

Extrait de la notice

upplied) Conversion adaptor if required (not supplied) RGB PCcable (not supplied) Mini D-sub 15p connector Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket. Connect the PC cable from the computer to the PC terminal on the back of the television. Press the Bto selectPC mode. The following signals can be displayed: VGA:640 x 480/60 Hz (VESA 480-60) SVGA: 800 x 600/60 Hz (VESA 600-60) XGA: 1024 x 768/60 Hz (VESA 768-60) PLEASENOTE: Some PC models cannot be connected to this television. An adaptor is not needed for computers with a DOS/V compatible mini D-sub 15p terminal. A band may appear at the edges of the screen or parts of the picture may be obscured. This is due to the strength of the signal, it is not a malfunction. When PC input mode is selected some of the television’s features will be unavailable e.g Manual settingin the SETUPmenu, Colour, Tint, DNRand Black Stretchin the PICTUREmenu. Signal information for Mini D-sub 15p connector Pin assignment for RGB/PC terminal Pin. No.Signal namePin No.Signal name 1R9NC 2G10Ground 3B11NC 4NC (not connected)12NC 5NC13H-sync 6Ground14V-sync 7Ground15NC 8GroundEnglish 8 Connections and controls If the red LED is unlit check that the mains plug is connected to the power supply. If the picture does not appear press a number button on the remote control, it may take a few seconds. To put the television into Standby press ion the remote control. To view the television press iagain or any of the number buttons. The picture may take a few seconds to appear. To set up the television you will now need to use the on-screen menus. Press the MENUbutton on the remote control to see the menus....