Notice TRENDNET TEG-240WS disponible gratuitement après inscription

Extrait de la notice

s is on the same network segment as the TEG-160WS/TEG-240WS. The default IP Address of the TEG-160WS/TEG-240WS is and the default password is "admin". 3. When I access the TEG-160WS/TEG-240WS using a web browser, I get a screen that tells me “only one user can login”. What should I do? Another computer is configuring the TEG-160WS/TEG-240WS. Please wait until the user logs off. If the other user has already logged off and you still get the same screen, then disconnect the power cord from the TEG-160WS/TEG-240WS, wait for 5 seconds, reconnect the power cord to the TEG-160WS/TEG-240WS, allow 5 seconds for the Switch to power on, and then attempt to access the web configuration page to login. 4. I forgot the administration password. How do I reset my TEG-160WS/TEG- 240WS? Press on the reset button using a pen or paperclip for 10 seconds. The default password is admin. 5.When I connect a computer to the Switch's gigabit port, the LINK/ACT LED turns on, but the 1000Mbps (TEG-160WS) or the SPEED (TEG-240WS) LED remains off. 1. For the TEG-160WS, when the 1000Mbps LED remains off, the computer's connection speed is 10Mbps or 100Mbps (if the 100Mbps LED is on). 2. For the TEG-240WS, if the SPEED LED is off, the computer's connection speed is 10Mbps. When the SPEED LED is yellow, the computer's connection speed is 100Mbps. Make sure that you have a Gigabit Ethernet adapter installed. Also make sure to use a Cat-5e or Cat 6 Ethernet cable. If you still encounter problems or have any questions regarding the TEG-160WS/TEG- 240WS, please refer to the User's Guide included on the Utility CD-ROM or contact Trendnet's Technical Support Department. http://192.168.0.1 Troubleshooting 6Copyright ©2010. All Rights Reserved. TRENDnet....