Notice WOLFCRAFT Support de meuleuse d'angle disponible gratuitement après inscription

Extrait de la notice

ks can damage paint, glass and other surfaces. Do not wear any nylon or polyester clothing, but suitable non-flammable work clothes. • Ensure that the mains cable does not protrude into the working area of the disc or where sparks are flying. Always insert the mains cable of the angle grinder in the cable holder (12). • Ensure that the work piece is correctly fixed in position between the two clamping jaws and is firmly positioned on the base plate. • Do not use work pieces which are too large to be fixed in position between the two clamping jaws. • Store the cutting stand in a dust-free and dry place. • Regularly inspect the firm seating of all of the screws before and during use. Regularly inspect the stand for signs of damage. Screws can become loose during use due to vibration. Do not use the cutting stand if you detect any damage. • Ensure that the cutting disc of your angle grinder is mounted perpendicular to the base plate. • Only use cutting discs and no roughing discs. • Also regularly inspect the cutting disc of your angle grinder for signs of damage. Under no circumstances should you use a disc if you should determine any dents, notches or other forms of damage. • Always remove the plug of your angle grinder from the socket before carrying out any cleaning or adjustment work on your cutting stand. • Never place you hand in the working area of the cutting disc. • Always observe the cutting depths as there is otherwise the risk of damaging your workbench. • Always remove the plug when not using the stand. BDAL 5019.000 09.03.2010 15:05 Uhr Seite 5F 6 Ce support est destiné à faciliter les travaux de tronçonnage (métal exclusivement) à l'aide d'une meuleuse d’angle à une main. Il s’utilise avec la plupart des meuleuses d...