Notice WOLFCRAFT Support meuleuse ø 230 mm

Notice WOLFCRAFT Support meuleuse ø 230 mm disponible gratuitement après inscription

Accédez à la notice du WOLFCRAFT Support meuleuse ø 230 mm en adhérant à la communauté.

Notice d’utilisation de votre WOLFCRAFT Support meuleuse ø 230 mm. La notice vous renseigne sur l’utilisation, donne des solutions aux problèmes d’entretien, de fonctionnement et d’assistance pour votre Support meuleuse ø 230 mm.

Notices - manuels - modes d'emploi disponibles pour WOLFCRAFT Support meuleuse ø 230 mm après inscription au groupe d'entraide

Aperçu de la notice

Extrait de la notice

• Cutting work generates sparks. Ensure that no flammable materials are in the working area. Sparks can damage paint, glass and other surfaces. Do not wear any nylon or polyester clothing, but suitable non-flammable work clothes. • Ensure that the mains cable does not protrude into the working area of the disc or where sparks are flying. • Ensure that the work piece is correctly fixed in position between the two clamping jaws and is firmly positioned on the base plate. • Do not use work pieces which are too large to be fixed in position between the two clamping jaws. • Clamp the work piece so that it is stress-free. • Secure the cut-off material in order to avoid injuries resulting from flying or falling work pieces. • Ensure that the cutting disc is not tilted and that it is always sufficiently tightened. • Do not remove the work piece when the disc is rotating. • Ensure that it is not used together with liquids. • Regularly inspect the firm seating of all of the screws before and during use as they can become loose due to vibration. • Store the cutting stand in a dust-free and dry place. • Regularly inspect both the stand and the cutting disc for any damage. Under no circumstances should you use a disc if you should determine any dents, notches or other forms of damage. The stand is also not to be used if you detect any damage. • Ensure that the cutting disc of your angle grinder is mounted perpendicular to the base plate. • Only use cutting discs and no roughing discs. • Always observe the cutting depths as there is otherwise the risk of damaging your workbench. • Always use the lever (29)of the cutting stand to bring the machine into the end position. • Always remove the plug of your angle grinder from the socket when not...

Produits WOLFCRAFT les plus consultés

En cours...