Notice INFOSEC 1000 XP

Notice INFOSEC 1000 XP

Mode d'emploi INFOSEC 1000 XP disponible.

Groupe d'entraide des utilisateurs INFOSEC 1000 XP
2 membres dans ce groupe pour vous aider
Trouver de l'aide en rejoignant le Groupe d'entraide des
utilisateurs de votre produit 1000 XP

Bienvenue dans le groupe d'entraide des utilisateurs

Le SAV entre consommateurs du groupe d’entraide INFOSEC 1000 XP vous permet de recevoir des solutions aux problèmes d’utilisation, conseils d’entretien, fonctionnement et assistance pour votre Onduleur INFOSEC. Rejoignez GRATUITEMENT le groupe d'entraide 1000 XP qui compte 2 membre(s) utilisateur(s) de ce produit. Devenir membre vous donne accès à différents services gratuits pour votre Onduleur : accès au mode d'emploi PDF et à la notice 1000 XP en français INFOSEC 1000 XP, guide de l'utilisateur, avis consommateur et forum actif, manuel d’utilisation, photos, vidéo et informations.


Dernières actualités du groupe d'entraide INFOSEC 1000 XP

Nouvelles questions du forum

Lancez la discussion

Nouveaux membres

  • fabdu117  depuis le 11/05/2012 - Expertise (non renseigné) - Utilisateur depuis (non renseigné)

Documentation disponible sur votre produit

Notice disponible après inscription gratuite au groupe d'entraide

Manuel/Notice/Mode d'emploi | 1 391 K | Français

Pas de lien disponible

Pas de vidéo disponible

« it limited working environments. The XP range of UPS is equipped with boost and buck AVR to stabilize input voltage. It also has a built-in DC start function. This function enables the UPS to be started up without an AC power supply. Although it is a small UPS, it is equipped with Smart USB communication port to offer users more benefits. The software helps users monitor UPS status. The main features of XP UPS are listed below. 2. MAIN CHARACTERISTICS Microprocessor control guarantees high reliability Equipped with boost and buck AVR Built-in USB Communication Port Green Power Function for energy saving DC Start Function Auto restart during AC recovery Compact size, lightweight Provides modem / phone line surge protection 3. SAFETY INSTRUCTIONS – Security The UPS unit uses potentially hazardous voltages. Do not take this equipment apart. It does not contain accessible components that can be repaired by users. All repairs should be performed by qualified technicians only. The UPS has its own internal power supply (battery). There is a risk that output sockets may still be live after the UPS has been disconnected from the mains power supply. The UPS has been designed for power computers. It should not be used with power electronic equipment with inductive loads such as motors or fluorescent lights. Do not connect any non-computer units to the UPS, such as medical equipment for artificial life handling, microwave, vacuum cleaner, etc. Laser printers should not be connected to the UPS as they consume too much power. Make sure that the power supply required does not exceed the capacity of the UPS. We recommend using an optimum power load equivalent to half or one third of the nominal power for longer backup time and battery life. Do not leave any container with liquid on the UPS or close to it. Unplug the UPS before proceeding to cleaning it. Do not directly apply any liquid detergent or sprays. The UPS should not be used in a damp place, nor exposed to direct sunlight or heat- emitting sources. Do not cover the ventilation slots. In case of emergency, switch the UPS to the “OFF” position and then unplug the power cord from the power socket to disable the UPS completely. Should the UPS fail to operate correctly, please refer to section 11: Trouble Shooting. INFOSEC UPS SYSTEM - 4, rue de la Rigotière – 44700 Orvault – FRANCE - Hot Line : tel : + 33 (0)2 40 76 15 82 - fax : + 33 (0)2 40 94 29 51 - – 09 05 04 206 03 3 4. STORAGE INSTRUCTIONS The UPS should be stored with its battery fully recharged. Storage temperatures above 20°C should be avoided as this will significantly shorten battery life. The UPS should be recharged once every 3 months. This is done by leaving it connected to the mains power supply for 24 hours. Batteries kept in storage should be recharged every 3 months, failure to do so could result in battery damage. 5. AFTER SALES SERVICE IMPORTANT! When calling the After-Sales Department, please have the following information ready, it will be required regardless of the problem: UPS model, serial number and date of purchase. Accurate description of the problem providing the following details: type of equipment powered by the UPS, indicator led status, alarm status, installation and environmental conditions. You will... »

Activité de ce groupe d'entraide

Note moyenne du groupe
Soyez le premier à noter ce produit
Durée moyenne d’utilisation
Pas d'avis consommateur
Donnez votre avis
Aucune discussion
Lancez la discussion !
Aucune opinion sur INFOSEC
Donner votre opinion sur INFOSEC
En cours...