Notice LANAFORM Vappy

« hat it is not damaged. Do not use the appliance if the cord is damaged. • Do not plug or unplug the appliance with wet hands. • Never disassemble the basic unit. • Never operate an appliance with a defective plug or cord, or after a breakdown or damage of any kind. In these cases, return the appliance to the nearest approved dealer/repairer for verification and any necessary repairs or adjustments. • Do not use additives such as perfumes, essences, etc. • Never add alkaline substances in the water tank. • Do not shake the appliance. This could spill water into the base unit and affect its operation. • Do not leave the humidifier in the sun for a long period. • If an unusual odour occurs during normal use, turn off the appliance, unplug it and have it verified by qualified personnel. • Unplug the appliance before cleaning it or removing the tank. • Never touch the water or the immersed components when the appliance is in operation. • Never turn on the humidifier when there is no water in the tank. • Never scratch the transducer. • To prevent any damage to the components, do not allow water to splash inside the base unit. • Never wash the entire unit with water; do not immerse it. • The ultrasonic humidifier should be cleaned regularly. To do this, refer to the cleaning instructions in this manual and respect them. • Do not use the humidifier if the air in the room is already sufficiently moist (at least 50 percent relative humidity). Excessive humidity gives rise to condensation on cold surfaces or cold walls in the room. To correctly assess the rate of humidity in the room, use a hygrometer available in most hardware and department stores. Vappy3ENCOMPONENTS INSTRUCTIONS Characteristics: • Capacity 3 L. • Functions continuously for more than 10 hours at maximum mist intensity • Diffuses large numbers of ions, promoting cell metabolism, increasing vitality and appetite, purifying the blood and calming the nerves. • Easy-to-fill water tank • Integrated safety device automatically stops diffuser operation when the water tank is empty. Note that the unit is no longer in operation if the signal light stays on. • Quiet and economical • High-quality transducer ensures correct, lasting operation. Functions: • Increasing and regulating the relative humidity of the room • Illuminating electrostatic charges • Improving the quality of the ambient air • Promoting visible good health and protecting the skin • Regulating the temperature of the program Instructions: • Put the appliance in the room for half an hour before switching it on, so that it reaches the ambient temperature. • We recommend using the appliance at a temperature between 5 and 40 °C and a relative humidity of less than 50%. • Remove the water tank from the appliance, unscrew the cap by turning it counter clockwise. • Fill the water tank with clear water at 40°C maximum. Check that the silicon ring is in place and close the cover by turning clockwise. • Verify the cleanliness and watertightness and then gently put the water tank back on the base. 4EN • With dry hands, connect the plug and turn the appliance on. The main signal light comes on. The appliance begins to operate. Adjust for desired intensity of mist by turning the mist control knob. Note: Although the safety device stops the operation of the transducer, avoid leaving the appliance plugged in whenever possible. Do not... »