Notice SAMSUNG HD502IJ

« n health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.Before You Start 2 English A_Handling precautions This hard disk drive is a highly precisioned electro-mechanical device and is very sensitive to shock and electrostatic discharge (ESD). Please avoid exposure to high temperatures and humidity. Use the original ESD protection package in which the product was originally shipped. Please handle the product with care. Damaged or detached label on any of the components may directly cause product malfunction and will void the warranty. - Leave the hard disk drive in the static shield package until ready for use - Handle multiple the hard disk drives one at a time - Do not bump or drop the hard disk drive C_Backing up your data Make a backup copy of your files before installing the new hard disk drive. Please refer to your computer and/or OS user's manual for more information. B_Kit components - Hard disk drive - SATA interface cable - Power cable - Mounting screws - Installation guide bookInstalling the hard disk drive English 3 Installing the hard disk drive The followings are of typical computer systems and hard disk drive mounting styles. SATA interface cable / Power cable Computer motherboardSerial ATA host adapter SATA interface cable Power cable NOTE : SATA 1.5Gb/s Speed Limit Jumper setting Only for SATA 3.0Gb/s products In some rare cases SATA 1.5Gb/s hosts can not establish SATA interface connection with SATA 3.0Gb/s devices due to interface protocol issues. In this case the jumper may be installed as shown on the figure below to force the device to negotiate for SATA 1.5Gb/s speed. Installing the hard disk drive 4 English a_Turn off the power of your computer b_Unplug the external power cables to the computer. c_Open the cover of your Computer Cover opening mechanism and the location of the hard disk drive may vary from one computer to another. (Consult your computer manual) d_Insert the HDD into an available 3.5" bay in your computer and secure it to the chassis using the provided screws. e_Connect Cables. 1.Attach the SATA interface cable to the interface connector on the hard disk drive. 2.Attach the power cable to the power receptor on the hard disk drive. The connector is keyed and will fit in only one way. 3.Check all other cable connections before turning on your computer. CAUTION!:Do not force or rock the connectors into their sockets on the hard disk drive. Push them in straight until they are seated. Setting the system BIOS Setting the system BIOS A_Turn on your computer system. During the startup sequence, run the CMOS(BIOS) setup program. Newer systems will typically display a message similar to "press DEL to enter SETUP", showing how to access the CMOS(BIOS) program. (What is the CMOS Setup?) It's a program that controls the computer's basic details such as Date and Time, memory capacity, and disk drive st... »