Notice NEXTAR NC990C

« ur equipment at a safe level BEFORE your hearing adapts. To establish a safe level: Start your volume control at the lowest setting , then slowly increase the sound until you can hear it comfortably and clearly, and without distortion we want you listening for a lifetime. Once you have established a comfortable sound level: Set the dial and leave it there. Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all, we want you listening for a lifetime. ABOUT THIS MANUAL This product features a number of sophisticated functions ensuring superior reception and operation. All are designed for the easiest possible use, but many are not self-explanatory. This operation manual is intended to help you benefit fully from their potential and to maximize your listening enjoyment. We recommend that you familiarize yourself with the functions and their operation by reading through the manual before you begin using this product. In this operation manual, the Basic Operation for each sound source is outlined at the beginning of its explanation, covering simple operation for that source, such as merely playing music. Remark: In addition to normal audio CD, this unit can play CD-R and CD-R/W disc that contain audio tracks as well; however, depending on the conditions of the recording equipment, recording program or the CD-R as well as CD-R/W disc itself, some CD-R or CD-R/W may not play. When making music CD with CD-R or CD-R/W disc, too high recording speed may result in poor signal quality and therefore, it is recommendable to select 24x or lower speed for CD-R recording and 4x or lower speed for CD-R/W recording. E 1 LOCATION AND FUNCTION OF CONTROLS 21 1 3 5 6 10 9 8 12 13 4 7 2 1114 1516181917 20 REL SEL 3 RPT2 INT56 MU 4 RDM1 VOL MMC SD MOD SCN A.PBND LOU ST LOC CLK MUTE LOUD INT RDM RPTMP3MUSIC ALBUM ARTIST ESP45 FLASH TRACKPOPROCKCLASSFLAT COMPACT DIGITAL AUDIOSUBWOPEN SD MMC 1. SEL( AUDIO MODE SELECT)/ROTARY ENCODER (1) Press SEL button shortly and repeatedly to change the mode in the sequence as follows: --> VOL --> BAS --> TRB --> BAL --> FAD --> 1) VOLUME CONTROL A. The volume level can be adjusted at any time by rotating the VOL knob as select mode has been initially defaulted at volume mode. B. The volume level is also obtained by stepping through the SEL button until the function VOL is displayed and then rotate the VOL knob to adjust the sound level. 2) BASS CONTROL A. Press the SEL button to select the bass mode until BAS appears on the display. B. Rotate the VOL knob to adjust the bass effect. 3) TREBLE CONTROL A. Press the SEL button to select the treble mode until TRE appears on the display. B. Rotate the VOL knob to adjust the treble effect. 4) BALANCE CONTROL A. Press the SEL button to select the balance mode until BAL appears on the display. B. Rotate the VOL knob to increase or decrease the sound level of left / right speaker. E 2 5) FADER CONTROL A. Press the SEL button to select the fader mode until FAD appears on the display. B. Rotate the VOL knob to increase or decrease the sound level of front / rear speaker. (2) When pressed longer 2 seconds, it is activated as cyc... »