Notice QSTARZ BT-Q1000

Demandez le mode d'emploi de votre QSTARZ BT-Q1000

Apreslachat lancera GRATUITEMENT pour vous la recherche
de cette notice dès votre inscription !
Devenez membre Demandez la notice Inscription gratuiteVous recevrez une alerte email dès que la notice de votre QSTARZ BT-Q1000 sera disponible

Bienvenue dans le groupe d'entraide des utilisateurs
QSTARZ BT-Q1000

Bluetooth

Le groupe d'entraide QSTARZ BT-Q1000 vous donne des conseils d'utilisation, solutions aux problèmes de fonctionnement, entretien et assistance pour votre GPS et Avertisseur de radars. Rejoignez GRATUITEMENT notre groupe d'entraide BT-Q1000 pour vous aider à mieux utiliser votre GPS et Avertisseur de radars QSTARZ. Le SAV entre consommateurs donne accès à différents services pour votre QSTARZ BT-Q1000 : recherche de notice BT-Q1000 et mode d'emploi pdf, manuel d'utilisation en français, avis consommateur et forum actif. Soyez le premier membre actif de ce groupe d'entraide.

QSTARZ BT-Q1000

Dernières actualités du groupe d'entraide QSTARZ BT-Q1000

Nouvelles questions du forum

Nouveaux avis

Nouveaux membres

  • pitusin  depuis le 18/08/2016 - Expertise (non renseigné) - Utilisateur depuis (non renseigné)
  • CYCLOHC  depuis le 15/12/2014 - Expertise débutant - Utilisateur depuis plus de 5 ans

Documentation disponible sur votre produit

Notice disponible après inscription gratuite au groupe d'entraide

Instructions de montage / Installation | 792 K | Français

Pas de lien disponible

Pas de vidéo disponible

« 4.                                   5.                                      6.                         B. Appearance  1.  Power jack (mini USB type)   2.  Mode switch (OFF/NAV/LOG)  3.  Battery status LED (Red/Green)   4.  Bluetooth status LED (Blue)  5.  GPS status LED (Orange) /  POI recording LED (Blue)  6.  Internal antenna   7.  POI button English ………………………………………………………………………………………………………………………………………………    ………………………………………………………………………………………………………………………………………………  2                                                                                                   www.Qstarz.com  C. Hardware Function  Hardware Function Description  Power Jack Take the power cable and connect it to the power jack (mini  USB type) for charging only  Mode Switch (OFF) Power off BT-Q1000P  Mode Switch  (NAV)  When switch to NAV mode, BT-Q1000P only can be used to  navigate and handheld devices (PDA / Smartphone /  Laptop…), and the data log function is disabled.  Mode Switch (LOG)  When switch to LOG mode, BT-Q1000P can be used to  record your travel path, and navigation function is still  enabled.  POI Button Push the POI button to log favorite Point of Interest   Mode Switch (OFF)       Mode Switch (NAV)    Mode Switch (LOG)                                       D. Battery Installation  D-1 Put Battery in place:  Press the PUSH button on the bottom side of the unit  and pull out the battery cover. Insert battery in the unit and put battery cover on  to the cabinet, then push down and force it forward to fit firmly.   D-2 Take Battery out:  Press the PUSH button on the bottom side of the unit and  pull out the battery cover. Then take out the battery from the unit.            Beyond Navigation English ………………………………………………………………………………………………………………………………………………….    .......................................................................................................................................................  www.Qstarz.com                                                                                                   3  E. Charging your battery  For the first time using the BT-Q1000P, please  charge battery until it is fully charged. Take the  power cable and connect it to the power jack (mini  USB type) and recharge through USB cable, travel  charger or car cigarette adaptor. This will begin to  charge the battery. Charging time is 3 hours  typically.   - When the Power LED is Red, battery power is low status. Please recharge.  - When the Power LED is Green, the battery is under charging mode.  - When the Power LED is blinking, the battery is fully charged.    F. Setup BT-Q1000P  F-1  Install the USB Driver and software utility (Only support Microsoft Windows  XP / Vista)  Please insert the Driver CD to your computer, and find the folder “Utility\PC Utility  V4\”. Double click “TravelRecorderV4_installer.exe” to install the software utility  package. This software package contains USB driver and PC Utility V4 software  inside.   F-2  Install Google Earth  BT-Q1000P supports to show your travel path directly on Google Earth. Please go  to http://earth.google.com for getting the free download of Google Earth, and  then install it to your computer.   G. Start to use  G-1  Fully charge the battery when using at the first time  A fully charged battery can last up to 32 hours continuously operation (under  optimum conditions... »

En cours...