Notice PHILIPS GC 3025/02 Elance 3000

Notice PHILIPS GC 3025/02 Elance 3000

Mode d'emploi PHILIPS GC 3025/02 Elance 3000 disponible.

Groupe d'entraide des utilisateurs PHILIPS GC 3025/02 Elance 3000

Bienvenue dans le groupe d'entraide des utilisateurs
PHILIPS GC 3025/02 Elance 3000

Type de fer à repasser : Fer à jet de vapeur et spray, Puissance maximale (en Watts) : 1900 Watts, Rechargeable / sans fil : Avec fil

Le groupe d'entraide PHILIPS GC 3025/02 Elance 3000 vous donne des conseils d'utilisation, solutions aux problèmes de fonctionnement, entretien et assistance pour votre Fer à repasser. Rejoignez GRATUITEMENT notre groupe d'entraide GC 3025/02 Elance 3000 pour vous aider à mieux utiliser votre Fer à repasser PHILIPS. Le SAV entre consommateurs donne accès à différents services pour votre PHILIPS GC 3025/02 Elance 3000 : accès à la notice GC 3025/02 Elance 3000 et mode d'emploi pdf, manuel d'utilisation en français, avis consommateur et forum actif. Soyez le premier membre actif de ce groupe d'entraide.

PHILIPS GC 3025/02 Elance 3000

Dernières actualités du groupe d'entraide PHILIPS GC 3025/02 Elance 3000

Nouvelles questions du forum

Nouveaux membres

  • BI-BI2  depuis le 02/08/2023 - Expertise débutant - Utilisateur depuis plus de 5 ans
  • nogopet376  depuis le 13/12/2020 - Expertise (non renseigné) - Utilisateur depuis (non renseigné)

Documentation disponible sur votre produit

Notice disponible après inscription gratuite au groupe d'entraide

Manuel/Notice/Mode d'emploi | 882 K | Français
Site Web Marque | Français

« ns. ?Never immerse the iron and the stand,if provided,in water. ?Keep the appliance out of the reach of children. ?The soleplate of the iron can become extremely hot and may cause burns if touched. ?Do not allow the cord to come into contact with the soleplate when it is hot. ?When you have finished ironing,when you clean the appliance, when you fill or empty the water tank and also when you leave the iron even for a short while:set the steam control to position O,put the iron on its heel and remove the mains plug from the wall socket. ?Always place and use the iron and the stand,if provided,on a stable,level and horizontal surface. ?Do not put perfume,vinegar,starch,descaling agents,ironing aids or other chemicals in the water tank. ?This appliance is intended for household use only. Before first use 1Check if the voltage rating on the typeplate corresponds to the supply in your home. C2Remove any sticker or protective foil from the soleplate. 3Heat up the iron to maximum temperature and iron over a piece of damp cloth for several minutes to remove any residue on the soleplate. The iron may give out some smoke when using it for the first time. After a short while this will cease. Filling the water tank Do not immerse the iron in water. ENGLISH4ENGLISH5 1Remove the plug from the wall socket. C2Set the steam control to position O (= no steam). 3Open the filling cap. 4Hold the iron in a tilted position. C5Pour tap water from the filling jug into the water tank up to the maximum level. Do not fill the tank beyond the MAX indication. If the tap water in your area is very hard,we advise you to mix it with an equal portion of distilled water,or to use distilled water only. Do not use vinegar,starch or chemically descaled water. 6Press to close the filling cap (click!). Setting the temperature 1Put the iron on its heel. C2Set the temperature control to the required ironing temperature by turning it to the position of the temperature indicator. -Check the garment label for the required ironing temperature. -1Synthetic fabrics (e.g.acrylic,viscose,polyamide,polyester) -1Silk -2Wool -3Cotton,linen -When you do not know what kind of fabric(s) the article is made of, try to iron on a spot which will be invisible when you wear it. -Silk,woolen and synthetic materials:iron the reverse side of the fabric to prevent shiny spots.To prevent stains,avoid using the spray function. -Start ironing the articles that require the lowest ironing temperature, such as those made of synthetic fibers. 3Put the plug in a grounded wall socket. C4When the amber temperature pilot light has first gone out, wait for a while before start ironing. BThe amber pilot light will come on from time to time during ironing. For Auto-shut-off versions (types GC3035,3027,3018,3017,3012 only) If the Auto-shut-off is activated (red pilot light blinks),move the iron slightly to deactivate it (blinking stops). LIN EN COTTONWOOL S I L K NYLON L IN O ALGODONLANA S E D A NILONSteam-ironing Make sure that there is enough water in the water tank. 1Set the temperature control to the recommended position. See section 'Setting the temperature'. C2Set the steam control to the appropriate steam position. -1 - 2 for moderate steam (temperature settings 2to 3) -3 - 4 for maximum steam (temperature settings 3to MAX) BSteaming will start as soon as the set temperature has been reached. ?If the selected ironing temp... »

Activité de ce groupe d'entraide

Note moyenne du groupe
3 étoiles
Durée moyenne d’utilisation
Avis consommateur
8 avis
Aucune opinion sur PHILIPS
Donner votre opinion sur PHILIPS
En cours...