Notice PHILIPS GC 3220

Notice PHILIPS GC 3220

Mode d'emploi PHILIPS GC 3220 disponible.

Groupe d'entraide des utilisateurs PHILIPS GC 3220

Bienvenue dans le groupe d'entraide des utilisateurs
PHILIPS GC 3220

Type de fer à repasser : Fer à jet de vapeur et spray, Puissance maximale (en Watts) : 2200 Watts, Rechargeable / sans fil : Avec fil

Le groupe d'entraide PHILIPS GC 3220 vous donne des conseils d'utilisation, solutions aux problèmes de fonctionnement, entretien et assistance pour votre Fer à repasser. Rejoignez GRATUITEMENT notre groupe d'entraide GC 3220 pour vous aider à mieux utiliser votre Fer à repasser PHILIPS. Le SAV entre consommateurs donne accès à différents services pour votre PHILIPS GC 3220 : accès à la notice GC 3220 et mode d'emploi pdf, manuel d'utilisation en français, avis consommateur et forum actif. Soyez le premier membre actif de ce groupe d'entraide.

PHILIPS GC 3220

Dernières actualités du groupe d'entraide PHILIPS GC 3220

Nouvelles questions du forum

Lancez la discussion

Nouveaux avis

Nouveaux membres

  • nogopet376  depuis le 13/12/2020 - Expertise (non renseigné) - Utilisateur depuis (non renseigné)
  • isa27000  depuis le 19/11/2014 - Expertise (non renseigné) - Utilisateur depuis (non renseigné)

Documentation disponible sur votre produit

Notice disponible après inscription gratuite au groupe d'entraide

Manuel/Notice/Mode d'emploi | 718 K | Français
Site Web Marque | Français

« e finished ironing,when you clean the appliance,when you fill or empty the water tank and also when you leave the iron even for a short while:set the steam control to position O,put the iron on its heel and remove the mains plug from the earthed wall socket. ?Place and use the iron on a stable ironing board or table. ?If a stand is provided with the appliance,ensure that the stand is placed on a stable surface. ?This appliance is intended for household use only. Before first use. 1Remove any sticker,protective foil or plastic shield from the soleplate (fig.1). BThe iron may give off some smoke when you use it for the first time.This will cease after a short while. Preparing for use. Filling the water tank 1Make sure the appliance is unplugged. 2Set the steam control to position 0 (= no steam) (fig.2). 3Open the cap of the filling opening. 4Tilt the iron backwards and fill the water tank with tap water up to the maximum level by means of the filling cup (fig.3). Do not fill the tank beyond the MAX indication. Do not put perfume,vinegar,starch,descaling agents,ironing additives, chemically descaled water or other chemicals in the water tank. 5Close the cap of the filling opening ('click'). Setting the temperature 1Put the iron on its heel and set the required ironing temperature by turning the temperature dial to the appropriate position (fig.4). Check the laundry care label for the required ironing temperature: -1Synthetic fabrics (e.g.acrylic,nylon,polyamide,polyester) -1Silk -2Wool -3Cotton,linen If you do not know what kind or kinds of fabric an article is made of, determine the right ironing temperature by ironing a part that will not be visible when you wear or use the article. Silk,woollen and synthetic materials:iron the reverse side of the fabric to prevent shiny patches.Avoid using the spray function to prevent stains.Start ironing the articles that require the lowest ironing temperature,such as those made of synthetic fibres. 2Put the mains plug in an earthed wall socket. 3When the amber temperature light has gone out,wait a while before you start ironing (fig.5). The amber temperature light will go on from time to time during ironing. Using the appliance. Steam ironing 1Make sure that there is enough water in the water tank. 2Select the recommended ironing temperature (see chapter 'Preparing for use',section 'Setting the temperature'). 3Select the appropriate steam setting.Make sure that the steam setting you select is suitable for the ironing temperature selected:(fig.6). -1 - 2 for moderate steam (temperature settings 2to 3) -3 - 4 for maximum steam (temperature settings 3to MAX) BThe iron will start steaming as soon as the set temperature has beenreached. BIf the selected ironing temperature is too low (MIN to 2),water may drip from the soleplate (see section 'Drip stop'). Ironing without steam 1Set the steam control to position 0 (= no steam) (fig.2). 2Select the recommended ironing temperature (see chapter 'Preparing for use',section 'Setting the temperature'). Features. Spray function You can use the spray function to remove stubborn creases at any temperature. 1Make sure that there is enough water in the water tank. 2Press the spray button several times to moisten the article to be ironed (fig.7). Shot of steam A powerful shot of steam helps to remove stubborn creases. The shot-of-steam function can only be used at temperature settings between 2and MAX... »

Activité de ce groupe d'entraide

Note moyenne du groupe
3 étoiles
Durée moyenne d’utilisation
Avis consommateur
4 avis
Aucune discussion
Lancez la discussion !
Aucune opinion sur PHILIPS
Donner votre opinion sur PHILIPS
En cours...