Notice PHILIPS GC9500

« the likelihood of circuit overload, do not operate another high wattage appliance on the same circuit. | Do not immerse the appliance in water or other liquid. | Do not touch the appliance with wet or damp hands or feet. | Do not leave the appliance exposed to the weather (rain, sun, etc.). | Do not use the appliance if the plug, the cord or the appliance itself is damaged. Do not disassemble or attempt to repair the appliance, as incorrect reassembling or repair could cause of risk of ?re, electric shock, or injury. Repair must be carried out by Philips, a service centre authorised by Philips or similarly quali?ed persons in order to avoid a hazard. | When you ?ll with water, replace accessories or have ?nished ironing and even when you leave the appliance for a short while, unplug the appliance. | Never yank cord to avoid contact with any hot surface. Let appliance cool completely before putting away. | Burns could occur from touching hot metal parts. Do not touch metal ironing surface when appliance is “ON”, or during prolonged cool-down period after use. | If an extension cord is absolutely necessary, a 10- Ampere rated cord should be used. Cord rated for less amperage may overheat. Care should taken to arrange the cord so that the cord cannot be pulled or tripped over. | Close supervision is necessary for any appliance being used by or near children. Do not leave appliance unattended while connected. | Always place the appliance on a stable, level and 4 ENGLISHhorizontal surface. Do not put the appliance on the soft part of an ironing board. | Never place damp cloths or clothes on the appliance to dry. | When the appliance is in use, never touch the hot surfaces. | Do not clean the inside of the appliance with ?ammable substances. | Do not place it on damp or wet surfaces. | Do not leave the packaging within the reach of children - it could be a source of danger. | Use the appliance only for its intended purpose. Any other use is improper and thus dangerous. PHILIPS will not be liable for any damages caused by its improper, wrongful or unreasonable use. | Before carrying out any cleaning or maintenance operations, switch off the appliance and cut off the power supply by removing the plug from the mains socket. | In the case of failure and/or incorrect functioning of the appliance, switch it off at once and do not tamper with it. For any repairs, contact a Technical Assistance Center authorized by PHILIPS to ensure use of genuine manufacturer’s spare parts. Any failure to comply with these requirements may render the appliance dangerous and will invalidate the guarantee. | If it is decided to scrap the appliance because it is no longer working, after removing the plug from the socket, it is recommended to cut off the plug thus rendering the machine unusable. You are also advised to make safe any parts of the appliance that could represent a hazard, in particular to children who could use it as a toy. | The press must be immediately unplugged from the mains socket after use, when left unattended, during maintenance or when replacing parts or accessories. | Never pull on the power cord to remove the plug from the socket or the mains, hold onto the plug for pulling. | In case of abrupt cut off in power supply, the press will remain closed. Unplug the appliance from the socket, reinstate the power, a... »