Notice KENWOOD KM264

« ith it. ?Never exceed the maximum capacities on page 5. ?Take care when lifting this appliance. Ensure the head is locked and that the bowl, tools, and cord are secure before lifting. ?This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. ?Children should be supervised to ensure that they do not play with the appliance. ?Only use the appliance for its intended domestic use. Kenwood will not accept any liability if the appliance is subject to improper use, or failure to comply with these instructions. before plugging in ?Make sure your electricity supply is the same as the one shown on the underside of your machine. ?This appliance conforms to EC directive 2004/108/EC on Electromagnetic Compatibility and EC regulation no. 1935/2004 of 27/10/2004 on materials intended for contact with food. know your Kenwood kitchen machine 2before using for the first time 1Remove all packaging. 2Push excess cord in the cord storage compartment in the back of the mixer. 3Wash the parts: see ‘care and cleaning’, page 8. know your Kenwood kitchen machine
medium speed outlet high speed outlet tool socket head release lever mixer head bowl on/off and speed switch power unit cord storage compartment beater dough hook with removable guard whisk splashguard 3   
   the mixing tools and some of their uses beater?For making cakes, biscuits, pastry, icing, fillings, éclairs and mashed potato. whisk?For eggs, cream, batters, fatless sponges, meringues, cheesecakes, mousses, soufflés. Don’t use the whisk for heavy mixtures (eg creaming fat and sugar) - you could damage it. dough hook?For yeast mixtures. to use your mixer 1Press down on the head release lever
and raise the mixer head until it locks into position. to insert a tool2Select a tool and push into the tool socket . ?Always ensure the guard is fitted onto the shaft of the dough hook before inserting into the outlet. Once inserted fit the guard to the mixer outlet to prevent food ingress. 3Fit the bowl into the base and turn clockwise to lock into position . 4Press down on the head release lever and lower the mixer head until it locks into position. 5Plug into the power supply then switch on and turn the speed switch to the desired setting. To switch off turn to ‘0’. ?Switch to pulse P for short bursts 6Unplug from the power supply. to remove a tool7Raise the mixer head and whilst holding it steady, pull the tool from the outlet. important?Some movement of the mixer head is normal when mixing heavy loads such as bread dough. If the mixer head is raised during operation, the machine will stop working straight away. To re-start the mixer, lower the mixer head, turn the speed switch to the off position, wait a few seconds and then re-select the speed. The mixer should resume operating straight away. ?If for any reason power to the mixer is interrrupted and the machine stops working, turn the speed switch to the off position, wait a few seconds and then re-select the speed. The mixer should resume operating straight away. ?The mixer will not operate unless all the outlet covers are correctly fitted to the machine. ?If you hear the machine labouring... »