Notice PHILIPS HR 7600 Comfort *

« If your appliance suddenly stopsrunning: 1Pull the mains plug out of the socket. 2Set the speed control to '0'. 3Let the appliance cool down for 60 minutes.Then the appliance is ready for use again. 4Put the mains plug back into the socket. 5Switch the appliance on again. Please contact your Philips dealer or an authorised Philips service centre if the automatic thermal cut-out system is activated too often. CAUTION:In order to avoid a hazardous situation,this appliance must never be connected to a timer switch. Important ?Read the instructions for use carefully and look at the illustrations before using the appliance. ?Keep these instructions for use for future reference. ?Check if the voltage indicated on the appliance corresponds to the local mains voltage (110-127V or 220-230V) before you connect the appliance. ?Never use any accessories or parts from other manufacturers or that have not been specifically advised by Philips.Your guarantee will become invalid if such accessories or parts have been used. ?Do not use the appliance if the mains cord, the plug or other parts are damaged.ENGLISH7 ?If the mains cord of this appliance is damaged, it must always be replaced by Philips or a service centre authorised by Philips,in order to avoid hazardous situations. ?Thoroughly clean the parts that will come into contact with food before you use the appliance for the first time. ?Do not exceed the quantities and preparation times indicated in the tables and recipes. ?Do not exceed the maximum content indicated on the bowl,i.e.do not fill beyond the top graduation. ?The emulsifying disc,the blade and the insert holder have to be placed on the tool holder that stands in the bowl. ?Unplug the appliance immediately after use. ?Never use your fingers or an object (e.g.a spatula) to push ingredients down the feed tube while the appliance is running.Only the pusher is to be used for this purpose. ?Always unplug the appliance before reaching into the bowl with your fingers or an object (e.g.a spatula). ?Keep the appliance out of the reach of children. ?Never let the appliance run unattended. ?Switch the appliance off before detaching any accessory. ?Never immerse the motor unit in water or any other fluid,nor rinse it under the tap.Use only a moist cloth to clean the motor unit. ?When you fit the lid properly onto the bowl, you will hear a click. ?Remove the protective cover from the blade before use. ?Avoid touching the SHARP cutting edges of the blade and the inserts,especially when the appliance is plugged in. ?If the blade gets stuck,unplug the appliance before removing the ingredients that are blocking the blade. ?Let hot ingredients cool down before processing them (max.temperature 80cC/175cF). ?The bowl is not suitable for the microwave. Using the appliance C1Place the tool holder in the bowl. C2Place the required accessory on the tool holder (beware of the sharp cutting edges!). C3Close the lid.Turn it in the direction of the arrows until you hear a click.ENGLISH8 C4Make sure the motor unit is switched off (speed setting '0').Press the release buttons and attach the motor unit by first inserting its rear end into the handle of the bowl. C5Then lower the front part of the motor unit onto the lid,until you hear a click. C6Place the pusher into the feed tube. To prevent ingredients from escaping through the feed tube,use the pusher to close the feed tube.... »