Notice DORO Arc 6+1

« ries (1.2V NiMH AAA) in accordance with the markings. 3. Charge with the keypad facing outwards (24 hours the ?rst time). 4. Press (left menu button). 5. Scroll {/} to HS SETTINGS. 6. Press OK (left menu button). 7. Scroll to LANGUAGE. Press OK. 8. Scroll to ENGLISH. Press OK. 9. Press L or several times to exit the menu screens. If the Arc 8r base unit’s display is showing -- the answer machine is disconnected, or time/date is not set. Date/Time 10. Press (left menu button). 11. Scroll {/} to HS SETTINGS. Press OK. 12. Scroll to HS DISPLAY. Press OK. 13. Scroll to TIME. Press OK. 14. Scroll to DATE & TIME. Press OK. 15. Scroll to SET TIME. Press OK. 16. Enter time of day (HH-MM). Press OK. 17. Scroll to SET DATE. Press OK. 18. Enter date (DD MM YY). Press OK. 19. Press L or several times to exit the menu screens. The format of date/time can also be adjusted. Battery When the batteries are relatively new and fully-charged (10 hours) they will last for approx. 100 hours’ standby time or approx. 10 hours’ call time.Thesetimesapplyatnormalroomtemperature.Fullbattery Thesetimesapplyatnormalroomtemperature.FullbatteryThese times apply at normal room temperature.Fullbattery FullbatteryFull battery capacity will not be reached until the batteries have been charged 4-5 times.Itisnotpossibletoovercharge ItisnotpossibletooverchargeIt is not possible to overcharge or damage the batteries by charging them for ”too long”. It may take up to 5 minutes charging before display wakes up, if batteries are totally empty. Please note! When the battery is low or when there is too great a distance to the base unit the telephone will be unable to connect to a line. Do not place the base unit close to other electrical equipment, in direct sunlight or other strong heat sources! This is to minimize the risk of any interference. It is normal for the device to become warm during charging and this is not dangerous. Use only original batteries. The guarantee does not cover any damage caused by using the wrong batteries.English 2 Battery LED When the batteries are running low, will ?ash and a warning tone will be heard when a call is in progress. Please note that the complete battery indicator in the display will ?ash as long as the handset is charging, and when the battery is fully charged only the inner segment will ?ash. Range The telephone’s range depends on whether or not the radio waves carrying the call are restricted by obstacles in their path, and is usually between 50 and 300 metres. Coverage can be improved by turning one’s head so that the handset is aligned with the base unit. Sound quality declines as the limit is reached until the call is ?nally interrupted. The 6 symbol is shown when the phone is within range and goes out/?ashes when it is out of range. Making a call 1. Enter the required number. Delete if necessary with right menu button C. 2. Press q to make the call. Press L to end the call. Please note! To switch between handset/speaker press . In speaker mode, you cannot both speak at once – you must take it in turns to talk. Receiving a call 1. Waitforthehandsettoring.Wait for the handset to ring. 2. Press q to answer. Press L to end the call. Volume control The volume may be adjusted during a call with {/}. Redial Press r. Scroll among the 10 most recently dialled numbers with {/}. Press q. Mute button The microphone can be switched off/on during a call with C (right men... »