Notice GoPro Wide HERO

« hen you use a 2GB SD card). Using Self-Timer Press the POWER/MODE button until you see the SELF TIMER icon and then press the shutter button. Press the SHUTTER button and the camera will automatically shoot a photo in 10 seconds. To Shoot Photos in “Photo every 2 seconds” Mode (blinking) Press POWER/MODE button. Press POWER/MODE button until you see the blinking camera icon. This indicates you are in “Photo ever 2 seconds” mode. Press the shutter button to start “Photo every 2 seconds” mode. Press the shutter again to stop. Assuming you are using a 2GB SD card, the camera will shoot approximately 1940+ photos with fully charged NiMH or Lithium batteries before the SD card is full. To Shoot Photos Press POWER/MODE button. Press the POWER/MODE button repeatedly until you see the solid, non blinking camera icon. Press SHUTTER button to take a photo. A beep will sound and red light will flash in the viewfinder window to indicate a photo has been taken and saved to memory. To Shoot Triple Shot Sequence Photos Turn on camera by pressing POWER/MODE button. Press POWER/MODE button until you see the triple shot icon on the front LCD status screen. Press the shutter button to shoot 3x photos in a single sequence. Delete all pictures Press the POWER/MODE button repeatedly until you see the DELETE ALL icon, 3 squares with a line through them. Press the SHUTTER button to delete the all pictures. The icon screen will blink for 5 seconds. If you press the SHUTTER button again during this blinking period, you will delete all the photos in the camera. If you do nothing during this blinking period, no photos will be deleted and the camera will return to single photo mode. Delete only the last picture Press POWER/MODE button repeatedly until you see the DELETE LAST icon. Press the SHUTTER button to delete the last photo. Transfer pictures and video files to your computer Connect the camera to a computer via the included USB cable. Turn on camera by pressing POWER/MODE button. In WINDOWS, double click on MY COMPUTER and you will see a “Removable Disk” icon. If you do not see this, close the MY COMPUTER folder and then re-open it and the ““Removable Disk” icon should appear. Double click the “Removable Disk” icon. Then double click the “DCIM” folder icon. Then double click the “100GOPRO” icon. The photo and video files will be in the “100GOPRO” folder. Highlight the pictures or video files and drag them to a folder of your choice or double click a file to view it. MAC USERS: Simply plug the camera into your MAC with the included USB cable and the MAC OS will recognize the camera as either a mass storage device or external hard drive. Setting the Camera Press the POWER/MODE button repeatedly until you see the SET icon Press the SHUTTER button to enter settings mode. Press the POWER/MODE button to cycle through these options once in SET mode. DEFAULT MODE SETTING AT POWER ON You can program your camera to turn on in either Video mode, Photo mode, Triple Shot Sequence mode, or Photo Every 2 Seconds mode. F = Video mode (F stands for “Filming”) P = Photo mode 3 = Triple Shot mode PES = Photo Every 2 Seconds mode Press the shutter button to cycle between choices, then press the POWER/MODE button to save it and proceed to the next setting. POWER FREQUENCY SETTING This setting can affect the quality of indoor photos if not set to... »