Notice DORO Congress 305

« allation Connection 1. Connect the curly cord to the handset and to the socket marked o on the underside of the telephone. 2. Connect the power adapter to the socket marked DC 9V on the underside of the telephone and to an electrical wall socket. 3. Connect the telephone line cord to the socket marked t on the underside of the telephone and to the network wall socket. 4. You will hear a click when the modular plug is correctly in place. 5. Position the cables in the grooves underneath the telephone. 6. Lift the handset and listen for the dial tone. Your telephone is now operational. Warning! This unit may only be used together with the supplied adapter. Connection of additional equipment On the side of the telephone there is a socket marked 8, this will allow additional telephone equipment i.e. cordless, modems etc to be connected allowing access to the telephone line. Important! When additional equipment is connected to the socket marked 8, only one device at a time will operate. Connection of a headset A headset can be connected to the socket underneath the telephone marked =. Once programmed, simply press the headset button = to access an incoming call or dial tone, press again to terminate the call. When headset mode has been selected the speakerphone function will NOT operate. Important! The DORO Congress 305 is designed to operate with DORO original headsets. Other manufacturer headsets may be used, although the function and sound quality cannot be guaranteed. Any damage occurring due to incompatible or non-Doro headsets being installed will not be covered under the telephone guarantee. English www.doro.com 5 Installation Labels/protective cover Information such as a company logo can be placed under the protective cover. This is especially useful where the back of the telephone is facing a customer/ visitor on a reception desk. The cover is attached with a slider located on the underside of the telephone next to the socket marked =. Push the slider in the direction of the arrow to unlock and remove the cover, push in the other direction to lock it. Hearing Aid compatible This telephone is hearing aid compatible. Select the T mode on your hearing aid to enable this feature. Recall Press the recall button R followed by the extension number to transfer calls when connected to a PBX (TBR only). Access to additional network services can be gained by using the recall button R, * and # keys. Contact your network operator for more information. Timer Approximately 5 seconds after dialling a timer will be shown on the display. The timer helps you keep track of how long the call lasts. Scroll Wheel The scroll wheel v/V is used to access all areas of the menu system including the phone book memories, CID memory, telephone settings etc. Use the scroll wheel wherever the instruction scroll is used.English 6 www.doro.com Installation Volume control The handset/headset earpiece and speakerphone volume may be adjusted during a conversation using the scroll wheel v/V. Important! Please note when programming all references to press = to press once and then immediately release the button. Language (UK and Europe) The display messages can be shown in the following languages: Swedish, Danish, Norwegian, Finnish, Polish, French, Spanish and English. 1. Press 0. PHONE BOOK will be displayed. 2. Scroll to SET MENU. Press 0. 3. Scroll to LANGUAGE. Press 0. 4.... »