Notice AXIS 211M

« pin I/O terminal connector - 1 transistor output, 1 digital input, auxiliary power and GND CDInstallation tool and other software, product documentation Printed materials•AXIS 210/210A/211/211A Installation Guide (this document) •Axis Warranty Document AXIS 211/AXIS 211A DC-IrisFocus puller Status indicator Tele/wide puller Status AXIS 210/AXIS 210A indicator DC-Iris control cable Focus pullerPage 4 AXIS 210/210A/211/211A Installation Guide Connections 1.Connect the AXIS 211/211A to your network using a standard network cable. 2.Connect power, using one of the 3 supported methods listed below: •The supplied power adapter. •PoE (Power over Ethernet) via the network cable (AXIS 210A/AXIS 211/AXIS 211A). This will automatically be detected if available via the network. •The I/O terminal connector on the rear panel. Important! To use the AXIS 211/211A outdoors it must be installed in an outdoor enclosure. For more information on outdoor enclosures, please visit www.axis.com Underside Power indicator Network indicator Control button Serial number Internal microphone (AXIS 210A AXIS 211A) External microphone/line input 210A/211A DC-Iris control cable AXIS 211/211A Power connector Audio output 210A/211A I/O terminal connector Network connector (and PoE 210A/211/211A) Rear panelAXIS 210/210A/211/211A Installation GuidePage 5 ENGLISH FRANCAISESPAÑOL Setting the IP address The AXIS 210/210A/211/211A is designed for use on an Ethernet network and must be assigned an IP address to make it accessible. AXIS IP Utility All installation methods This table shows all of the available methods for setting or discovering the IP address. Select a method from the left-hand column and check the requirements for it to the right. Notes: •UPnP™ and DHCP are both enabled by default in the AXIS 210/210A/211/211A. •The AXIS 210/210A/211/211A has the default IP address 192.168.0.90 •To view the admin pages for the DHCP server, please see the server’s own documentation. You may need to contact your network administrator. •If setting the IP address fails, check that there is no firewall blocking the operation. AXIS IP Utility is the recommended method for setting an IP address in Windows. This free application can be used on networks with or without a DHCP server. See page6 for more information. DHCP Server in network Install on same network segment Internet connection with no HTTP proxy Operating system AXIS IP Utility (recommended method) See page6 OptionalRequiredWindows UPnP™ See page7 OptionalRequiredWindows (ME or XP) ARP/Ping See page7 RequiredAll AXIS Dynamic DNS Service See page8 RecommendedRequiredAll View DHCP server admin pages for IP address (See note below) RequiredAll Requirements methodsInstallationPage 6 AXIS 210/210A/211/211A Installation Guide AXIS IP Utility AXIS IP Utility is a free Windows application that discovers and displays Axis devices on your network. The application can also be used to manually set a static IP address. Note that you must install the AXIS 211/211A on the same network segment (physical subnet) as the computer running AXIS IP Utility. AXIS IP Utility is available on the CD supplied with this product, or it can be downloaded from www.axis.com/techsup Automatic discovery 1.Check that the AXIS 211/211A is connected to the network and that power has been applied. 2.Start AXIS IP Utility. When... »