Notice BIONAIRE BFH3520-I

« NBENUTZERHANDBUCHMANUAL DE INSTRUCCIONESINSTRUCTIEHANDLEIDINGBRUKSANVISNINGKÄYTTÖOPASBRUKERHÅNDBOK INSTRUKCJA

  NÁVOD K OBSLUZEHASZNÁLATI UTASÍTÁS??????????? ?? ???????????? MANUALE D'USOMANUAL DE INSTRUÇÕES English2 Deutsch/German5 Français/French8 Español/Spanish11 Nederlands/Dutch14 Svenska/Swedish17 Suomi/Finnish20 Norsk/Norwegian23 Polski/Polish26 EKKHNIKA/Greek29 "esky/Czech32 Magyar/Hungarian35 PYCCKNÑ/Russian38 Italiano/Italian42 Português/Portugese45BFH3520 A B C D E F Fig.1 H G I J K L Fig.4Fig.2 Fig.3 C B D I JKSetting the OffTimer: 1.Select the Mode and/or temperature you wish the heater to run in. 2.While the heater is running, press and hold the up (+) and down (-) buttons simultaneously. 3.By pressing the up (+) and down (-) buttons, program the heater to turn off in up to 16 hours from the current time, in increments of 1 hour. 4.After setting the timer, the LCD display will return to show the current room temperature. An LED will illuminate to show that the timer is activated. 5.After the predetermined length of time has passed, the heater will automatically shut off. Setting the On Timer: 1.While the heater is off, press and hold the up (+) and down (-) buttons simultaneously. 2.By pressing the up (+) and down (-) buttons, program the heater to turn on up to 16 hours in advance of current time, in increments of 1 hour. 3.After the preset length of time has passed, the heater will automatically turn on Auto Mode HI Power at 24°C for a preset time of 2 hours. OSCILLATION INSTRUCTIONS Press ( ) button J to start and ( ) button J again to stop oscillation. REMOTE CONTROL INSTRUCTIONS Before operation, insert 2 “AAA”batteries (not included) into the back of the remote control.Remove batteries before discarding the remote control. •Do not mix old and new batteries. •Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries. The remote control for this unit has the capability of operating all control panel functions (see Fig. 3, 4). POWER:To turn the unit on press the Mode ( ) button.To turn the unit off press the Mode ( ) button. MODES:To scroll through the various modes FA, HI, LO, AH, AL and AF press the Mode ( ) Button until you reach your desired setting. OSCILLATION:To start oscillation, press the Oscillation ( ) Button once.To stop oscillation press the button again. TEMPERATURE:The temperature can be adjusted only when the unit is set on the Auto Mode Hi (AH) and Auto Mode Lo (AL).To increase the temperature setting, press the (+) button.To decrease the temperature setting that you desire press the (-) button. TIMER:To activate the timer from the remote control, press the Timer Button ( ).From there you can press the (+) or (-) button, which will give you the ability to program the heater to turn on or off in 1 hour increments, up to 16 hours. For more information see Using Programmable Timer instructions above. AUTO SAFETY SHUT-OFF This heater is equipped with a technologically advanced, safety system that requires the user to reset the heater if there is a potential overheat situation.When a potential overheat temperature is reached, the system will automatically shut the heater off.It can only resume operation when the user resets the unit. To reset the heater 1.Press the MODE ( ) button. 2.Unplug the heater and wait for 30 minu... »