Notice YAMAHA DSP-E800

Notice YAMAHA DSP-E800

Mode d'emploi YAMAHA DSP-E800 disponible.

Groupe d'entraide des utilisateurs YAMAHA DSP-E800

Bienvenue dans le groupe d'entraide des utilisateurs
YAMAHA DSP-E800

Le groupe d'entraide YAMAHA DSP-E800 vous donne des conseils d'utilisation, solutions aux problèmes de fonctionnement, entretien et assistance pour votre Amplificateur. Rejoignez GRATUITEMENT notre groupe d'entraide DSP-E800 pour vous aider à mieux utiliser votre Amplificateur YAMAHA. Le SAV entre consommateurs donne accès à différents services pour votre YAMAHA DSP-E800 : accès à la notice DSP-E800 et mode d'emploi pdf, manuel d'utilisation en français, avis consommateur et forum actif. Soyez le premier membre actif de ce groupe d'entraide.

YAMAHA DSP-E800

Dernières actualités du groupe d'entraide YAMAHA DSP-E800

Nouvelles questions du forum

Nouveaux avis

Nouveaux membres

  • nogopet376  depuis le 13/12/2020 - Expertise (non renseigné) - Utilisateur depuis (non renseigné)
  • Marcellos94  depuis le 31/12/2017 - Expertise (non renseigné) - Utilisateur depuis (non renseigné)

Description de votre produit

Puissance par canal : 70 Watts, Impédance de la puissance de sortie : 8 Ohms, Nombre de canaux de sortie : 6 canaux, Rapport signal/bruit : 99 dB, Description : Noir, Type de commande à distance : Avec télécommande, Type d'amplificateur : Amplificateur

Documentation disponible sur votre produit

Notice disponible après inscription gratuite au groupe d'entraide

Manuel/Notice/Mode d'emploi | 3 894 K | Français

Pas de lien disponible

Pas de vidéo disponible

« IKSAANWIJZING DSP-E800CAUTION CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1.To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2.Install this unit in a cool, dry, clean place — away from windows, heat sources, sources of excessive vibration, dust, moisture and cold. Avoid sources of humming (transformers, motors). To prevent fire or electrical shock, do not expose the unit to rain or water. 3.Never open the cabinet. If something drops into the unit, contact your dealer. 4.Do not use force on switches, controls or connection wires. When moving the unit, first disconnect the power cord and then the wires connected to other component. Never pull the wires themselves. 5.The openings on the cover assure proper ventilation of the unit. If these openings are obstructed, the temperature inside the unit will rise rapidly. Therefore, avoid placing objects against these openings, and install the unit in a well-ventilated area to prevent fire and damage. Be sure to allow a space of at least 20 cm behind, 20cm on both sides and 30 cm above the top panel of the unit to prevent fire and damage. 6.The voltage used must be the same as that specified on this unit. Using this unit with a higher voltage than specified is dangerous and may result in fire or other accidents. YAMAHA will not be held responsible for any damage resulting from the use of this unit with a voltage other than that specified. 7.Digital signals generated by this unit may interfere with other component such as tuners, receivers and TVs. Move this unit farther away from such component if interference is observed. 8.Always set VOLUME to the “m” position before starting the audio source play. Increase the volume gradually to an appropriate level after playback has been started. 9.Do not attempt to clean the unit with chemical solvents; this might damage the finish. Use a clean, dry cloth. 10.Be sure to read the “TROUBLESHOOTING” section regarding common operating errors before concluding that the unit is faulty. 11.When not planning to use this unit for a long period of time (e.g., a vacation), disconnect the AC power cord from the wall outlet. 12.To prevent lightning damage, disconnect the AC power cord when there is an electrical storm. 13.Grounding or polarization — Precautions should be taken so that the grounding or polarization of the unit is not defeated. 14.AC outlet — Do not connect audio component to the AC outlet on the rear panel if that component requires more power than the outlet is rated to provide. This unit is not disconnected from the AC power source as long as it is connected to the wall outlet, even if this unit itself is turned off. This state is called the standby mode. In this state, this unit is designed to consume a very small quantity of power. nFor U.K. customers If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions described below. Note •The plug severed from the mains lead must be destroyed, as a plug with bared flexible cord is hazardous if engaged in a live socket outlet. nSpecial Instructions for U.K. Model IMPORTANT THE WIRES IN MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE: Blue: NEUTRAL Brown: LIVE As the colours of the wires in the mains lead of this appar... »

En cours...