Notice HONEYWELL BH-888E

« ALTSVERZEICHNISDEUTSCH SOMMAIREFRANÇAIS INHOUDSOPGAVENEDERLANDS INDICEESPAÑOL INDICEPORTUGUÊS INDICEITALIANO INNEHÅLLSFÖRTECKNINGSVENSKA INNHOLTSFORTEGNELSENORSK INDHOLDSFORTEGNELSEDANSK SISSÄLLYSLUETTELOSUOMI SISUKORDEESTI TURINYSLIETUVIU SATURA RADITAJSLATVIEŠU SPIS TRESCIPOLSKI F‹HR‹STTÜRKÇE TARTALOMJEGYZÉKMAGYAR OBSAHCESKY SADRŽAJHRVATSKI VSEBINASLOVENSKO CO?EP?AH?E??????? ?????????E??HNIKA 78 71 67 64 61 58 55 52 49 46 43 40 37 34 31 28 25 22 18 15 11 8 5BH-888E/BH-999E 3 9 10 8 (not valid in UK) 11 1521234 6711BH-888E/BH-999E 4 Fig. 1 Fig. 2Fig. 3+4 Fig. 5Fig. 65 ENGLISH IMPORTANT SAFETY INSTRUCTIONS Read through all the instructions before starting to use the fan heater. Keep this instruction manual in a safe place for future reference. 1.Supervision is necessary when the fan heater is used in the vicinity of children. 2.Do not use the fan heater outdoors. 3.The fan heater must only be used after it has been moun- ted according to this instruction manual. Mount the fan hea- ter vertically on a straight wall: Be sure to observe the speci- fied safety distances as shown in Fig. 1 and 2, and also observe your local safety regulations. Do not mount the fan heater on combustible or instable surfaces (e.g. wood or plastic surfaces) or under the ceiling. Fire hazard! 4.Unwind the power cord completely. An incompletely unwound power cord can lead to overheating and cause a fire. Do not touch the power cord with wet hands.Make sure that there are no objects are resting on the power cord or could come into contact with hot parts. Position the power cord where nobody can trip over it and where the power socket is easily accessible. 5.Do not use an extension cord, a multiway connector or an infinitely variable speed controller. These can lead to overheating, fire or electric shock. 6.Connect the fan heater only to a single-phase socket with the supply voltage as stated on the type plate of the appliance. The fan heater is equipped with double electric insulation (Class II) and does not have to be earthed.* 7.Always switch the fan heater off with the rotary thermo- stat switch (2) and always disconnect the power plug (8) from the power socket when the fan heater is not in use. Allow the fan heater to cool off for at least 20 minutes before it is moved, handled or cleaned. Do not tug at the power cord to disconnect the plug. Handle the fan heater only with dry hands. Do not leave the fan heater unatten- ded when it is running.* 8.Do notuse the fan heater anywhere near inflammable gases or substances such as solvents, lacquers, glues etc. 9.Do not mount the fan heater immediately under a power socket. 10.Do not mount and use the fan heater in close proxi- mity to a bathtub, a shower or a swimming-pool (Fig. 1). 11.Do notuse the fan heater in any kind of vehicle (e.g. portacabin, lift, elevator, motor vehicle, cubicle) or similar enclosed space. 12.Caution: The air outlet vent (7) of the fan heater gets very hot during use. Inflammable materials such as cus- hions, pillows, duvets, blankets, furniture, paper, curtains, drapes and clothing must be kept at least 100 cm distance from the fan heater (Fig. 2). 13.Keep the fan heater clean. Make sure that the air intake vent (6) and air outlet vent (7) are open before starting to use the fan heater. Do notallow objects to get into the air intake vent (6) or air outlet vent (7). Do notcove... »