Notice MICROSOFT Xbox 360

« Keep all manuals for future reference. For replacement manuals, go to www.xbox.com/support or call Xbox Customer Support (see ”If You Need More Help”). The limited warranty covering this product is contained in the Xbox 360 Warranty manual (Volume 2). Dispose of this product in accordance with local and national disposal regulations (if any), including those governing the recovery and recycling of waste electrical and electronic equipment (WEEE). Clean only with a dry or slightly damp cloth. Using cleaning solutions or attempting to clean connectors may damage your controller. Disposable Battery Safety Improper use of batteries may result in battery ?uid leakage, overheating, or explosion. Released battery ?uid is corrosive and may be toxic. It can cause skin and eye burns, and is harmful if swallowed. To reduce the risk of injury: • Keep batteries out of reach of children. • Do not heat, open, puncture, mutilate, or dispose of batteries in ?re. • Do not mix new and old batteries or batteries of different types (for example, carbon- zinc and alkaline batteries). • Remove batteries if they are worn out or before storing for an extended period of time. • If a battery leaks, remove all batteries, taking care to keep the leaked ?uid from touching your skin or clothes. If ?uid from the battery comes into contact with skin or clothes, ?ush skin with water immediately. Before inserting new batteries, thoroughly clean the battery compartment with a damp paper towel, or follow the battery manufacturer’s recommendations for cleanup. • Dispose of batteries in accordance with local and national disposal regulations, including those governing the recovery and recycling of waste electrical and electronic equipment (WEEE). SET UP YOUR UNIVERSAL MEDIA REMOTE Insert Batteries To insert batteries into the remote control: 1 Remove the media remote battery cover. 2 Insert two new AA (LR6) batteries as shown on the underside of the media remote battery cover. For best performance, AA rechargeable batteries are not recommended. 3 Replace the media remote battery cover. Program the Universal Media Remote for Your TV Before your media remote can work with your TV, you need to program it for use with your particular brand of TV. Two methods exist for programming your remote, manually entering your TV code or scanning to ?nd your TV code. For the latest list of TV library codes, go to www.xbox.com/support. NOTE After 30 seconds of inactivity, the media remote will exit the screen. Pressing any button besides 0–9, CH+, or CH– returns the remote to its original settings. To enter a TV code: 1 Turn on your TV and point the remote toward it. 2 Press and hold the TV and OK buttons simultaneously for two seconds. All of the buttons on the media remote will then light up for two seconds, after which only the numeric TV buttons (1–12) will remain lit. 3 Enter the code for your TV. 4 Press the TV button again to save the code and exit. All of the buttons on the media remote will blink three times to con?rm your selection. To scan for a TV code: 1 Turn on your TV and point the remote toward it. 2 Press and hold the TV and OK buttons simultaneously for two seconds. All of the buttons on the media remote will then light for two seconds, after which only the numeric TV buttons (1–12) will remain lit. 3 Press the CH+ or CH– button to send a series of off commands to your TV. Repeat un... »