Notice AEG DD9996B

« rsions of this appliance. Accor- dingly, you may ?nd descriptions of individual features that do not apply to your speci?c appliance. INSTALLATION • The manufacturer will not be held liable for any damages resulting from in- correct or improper installation. • The minimum safety distance between the cooker top and the extractor hood is 650 mm (some models can be installed at a lower height, please re-fer to the paragraphs on working dimensions and installation). • Check that the mains voltage corresponds to that indicated on the rating plate ?xed to the inside of the hood. • For Class I appliances, check that the domestic power supply guarantees ade- quate earthing. Connect the extractor to the exhaust ?ue through a pipe of mi- nimum diame-ter 120 mm. The route of the ?ue must be as short as possible. • Do not connect the extractor hood to exhaust ducts carrying combustion fumes (boilers, ?replaces, etc.). • If the extractor is used in conjunction with non-electrical appliances (e.g. gas burning appliances), a suf?cient degree of aeration must be guaranteed in the room in order to prevent the back?ow of exhaust gas. The kitchen must have an opening communicating directly with the open air in order to guar-antee the entry of clean air. USE • The extractor hood has been designed exclusively for domestic use to elimi- nate kitchen smells. • Never use the hood for purposes other than for which it has been designed. • Never leave high naked ?ames under the hood when it is in operation. • Adjust the ?ame intensity to direct it onto the bottom of the pan only, making sure that it does not engulf the sides. • Deep fat fryers must be continuously monitored during use: overheated oil can burst into ?ames. • Do not ?ambè under the range hood; risk of ?re • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concern- ing use of the appliance by a person responsible for their safety. • Children should be supervised to ensure that they do not play with the appli- ance. MAINTENANCE • Switch off or unplug the appliance from the mains supply before carrying out any maintenance work. • Clean and/or replace the Filters after the speci?ed time period (Fire hazard). • Clean the hood using a damp cloth and a neutral liquid detergent. The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city of?ce, your household waste disposal service or the shop where you purchased the product.4 EN CHARACTERISTICS Dimensions ???? ????? ???? ?????5 EN Components Ref. Q.ty Product Components 1 1 Cooker hood with control unit, lights, blower unit, ?lters 2.1 1 Upper chimney 2.2 1 Lower chimney 8 1 Air outlet grid 9 1 Reducer ?ange Ø 150-120 10 1 Damper 16 1 Cover for recycling version Ref. Q.ty Installation Components 7.2.1 2 Fixing bracke... »