Notice BOSCH TDA7680

« en you wear or use the garment. Start ironing the garments that require the lowest ironing temperature, such as those made of synthetic ?bres. Silk, wool or synthetic materials: iron the reverse side of the fabric to prevent shiny patches. •Synthetics ••Silk-Wool •••Cotton-Linen Filling the water tank Set the steam regulator to the position and unplug the iron from the mains! Use only clean water from the tap without mixing anything with it. The addition of other liquids, such as perfume, will damage the appliance. Any damage caused by the use of the aforementioned products will make the guarantee void. Do not use condensation water from tumble dryers, air conditionings or similar. This appliance has been designed to use normal tap water. To prolong the optimum steam function, mix tap water with distilled water 1:1. If the tap water in your district is very hard, mix tap water with distilled water 1:2. To prevent spillage of water out of the appliance in vertical position, never ?ll beyond the “max” water level mark! Getting ready (1) Remove any labels or protective coverings from the soleplate. Ironing without steam (2) Ironing with steam (3) Only when the temperature control dial is placed in the areas with the steam symbol. ProEnergy (Depending on the model) The “e” steam setting (energy saving “e” setting: 24% energy saving*) can be used for most fabrics. The steam settings should only be used on thick fabrics where there are still wrinkles. Steam setting e Temperature Setting Recomended Steam Regulator Setting ••• to “max”e and ••e *in comparison to the maximum steam setting of a regular 2400 Watt max Bosch iron Note: At a temperature setting of “•”, the soleplate is not hot enough to produce steam so the steam regulator should be set to the position to avoid water dripping from the soleplate. en Thank you for buying the “SensorSecure” steam iron from Bosch. This iron has been designed according to ecological criteria, related to the sustainable development; analyzing its whole lifecycle, from material selection to its later reusing or recycling; evaluating the improvement possibilities, from a technical, economical and environmental point of view. This appliance has been designed exclusively for domestic use and must not be used for industrial purposes. Carefully read through the operating instructions for the appliance and safeguard them for future reference. General safety warnings Danger of electric shocks or ?re! This appliance is to be connected to the mains supply and used in accordance with the information stated on its speci?cations plate. Never plug the appliance into the mains supply if the cable or the appliance itself shows visible signs of damage. This appliance must be connected to an earthed socket. If it is absolutely necessary to use an extension cable, make sure that it is suitable for 16A or more and has a socket with a earth connection. In order to avoid that, under unfavourable mains conditions, phenomena like transient voltage drops or lighting ?uctuations can happen, it is recommended that the iron is connected to a power supply system with a maximum impedance of 0.27 O. If necessary, the user can ask the public power supply company for the system impedance at the interface point. Keep the appliance out of children’s reach. This appliance is not intended to be used by per... »