Notice CAMSPORTS Coach

« hat you remove the TF card in power-off mode to avoid data loss or damages to the device or TF card. • Ensure to format Micro SD card before using. Operations • SWITCH ON To start the device,press the On/Off/Record button once, the blue LED light will flash,then the device starts recording. • SWITCH OFF One short press of the On/off/Record button, the device will save data and power off automaticly. • RESET If device does not work normally, please reset. • SET THE FILE DATE-TIME 1.Connect the device with PC and power on. 2.Open the new disk window 3.Set up a new document in TEXT format. 4.Rename the new Text document as“TIME”. 5.Open the new Text document,input the local true time according to the following format.For example, if the current time and date in Paris is: 19:10:00, September 5 th ,2010 So we input like this: 2010 09 05 19 10 00 Space are needed between each number. Check to reset the time according to the format above other wise,the resetting will fail. Battery • If the camera fails to start, the battery probably needs to be recharged. Usually a full charge requests 3 to 4 hours, do not charge it for over 12 hours. • The LED lights turns red when starts recharging and turns green when battery is fully charged. • Please do not use AC adaptors other than the one proposed as accessories by CAMSPORTS to avoid damages to the product. • Better charge the battery in power-off mode for fast recharge and best product protection. Connections System requirements : • CPU must be at least 2.0ghz Dual Core or above • Operating system: Win7 / WinXP / VISTA, Mac OS 10 • USB slot • Minimum 5Gb free hard disk space, min. 1Gb memory Lower PC configuration with integrated graphic may sometimes show slack video play, suggest to use a pc with good graphics. Connecting to PC or LAPTOP • Plug the mini USB cable to the device and then connect to computer USB port. • The computer will recognize the newly added disk and shall install the generic driver if necessary • After installation, a new window will popup, and you are able to see a folder namely “DCIM” with the video files you have just recorded ready for downloading to local disk. • You can then copy or cut and save to your local hard drive. When finished, remove the files from the camera by erasing the files or formatting the camera storage disk. • Remove the storage disk. Troubleshooting Symptom Possible reason Solution fail to start flat battery, recharge battery System halted reset, then start again cannot recognize when connect to pc/laptop connect to pc when power off connect to pc when device on USB cable failure replace new cable pc bios disabled set USB enabled main board does not support USB port update mainboard driver pc system jam reboot pc data not saving memory is full delete unwanted files power auto off after start battery power shortage recharge memory is full delete unwanted files Illustration Caractéristiques Résolution HD 1280 x 720P Format vidéo / Codec MOV, H.264, 30 images par seconde Angle vidéo 135 degrés Mémoire Carte micro SD 4 Go incluse, Class 4 (max.32 Go) Alimentation interne Batterie 550mAh LIon-POlymère Autonomie batterie 1.5 - 2 heures Consommation < 1 watt Taille 145 x 70 x 47mm (pliées) Poids 57 g USB 2.0 Temp. d’utilisation -10° C / + 4... »