Notice HAGEN Fluval 404 Aquastop

Notice HAGEN Fluval 404 Aquastop

Mode d'emploi HAGEN Fluval 404 Aquastop disponible.

Groupe d'entraide des utilisateurs HAGEN Fluval 404 Aquastop

Bienvenue dans le groupe d'entraide des utilisateurs
HAGEN Fluval 404 Aquastop

Le groupe d'entraide HAGEN Fluval 404 Aquastop vous donne des conseils d'utilisation, solutions aux problèmes de fonctionnement, entretien et assistance pour votre Accessoires Aquarium - Terrarium. Rejoignez GRATUITEMENT notre groupe d'entraide Fluval 404 Aquastop pour vous aider à mieux utiliser votre Accessoires Aquarium - Terrarium HAGEN. Le SAV entre consommateurs donne accès à différents services pour votre HAGEN Fluval 404 Aquastop : accès à la notice Fluval 404 Aquastop et mode d'emploi pdf, manuel d'utilisation en français, avis consommateur et forum actif. Soyez le premier membre actif de ce groupe d'entraide.

HAGEN Fluval 404 Aquastop

Dernières actualités du groupe d'entraide HAGEN Fluval 404 Aquastop

Nouvelles questions du forum

Nouveaux avis

Nouveaux membres

  • nogopet376  depuis le 15/12/2020 - Expertise (non renseigné) - Utilisateur depuis (non renseigné)
  • Pilou_vivi  depuis le 20/04/2020 - Expertise (non renseigné) - Utilisateur depuis (non renseigné)

Documentation disponible sur votre produit

Notice disponible après inscription gratuite au groupe d'entraide

Manuel/Notice/Mode d'emploi | 2 634 K | Français

Pas de lien disponible

Pas de vidéo disponible

« e electrical components of the appliance get wet, unplug the appliance immediately. B. Carefully examine the appliance after installation. It should not be plugged in if there is water on parts not intended to be wet. C. Do not operate any appliance if it has a damaged cord or plug, or if it is malfunctioning or if it is dropped or damaged in any manner. The power cord of this appliance cannot be replaced; if the cord is damaged, the appliance should be discarded. Never cut the cord. D.To avoid the possibility of the appliance plug or receptacle getting wet, position the unit to one side of a wall mounted receptacle to prevent water from dripping onto the receptacle or plug. A “drip loop”(see illustration) should be arranged to the receptacle. The “drip loop” is that part of the cord below the level of the receptacle or the connector if an extension cord is used, to prevent water traveling along the cord and coming into contact with the receptacle. If the plug or receptacle does get wet, DON’T unplug the cord. Disconnect the fuse or circuit breaker that supplies power to the appliance. Then unplug and examine for presence of water in the receptacle.Introduction For the complete enjoyment, use and understanding of this Canister Power Filter, it is recommended that this manual be thoroughly followed. Failure to do so may result in loss of fish life and/or damage to this filter. Save this manual for future reference. This Fluval Canister Filter system incorporates the most advanced pump and media handling technology presently available. It has numerous user features that permit greater control of both the filter’s interaction with the aquatic environment and the aquarist’s desire to control water characteristics. Now, more than ever, Fluval Canister filters provide a greater amount of filter media and media configurations than any other comparable filter. A minimum of 4 and up to a maximum of 8 media types may be used in separate compartments, depending on the filter chosen. The space may be used according to the needs of each individual situation. Fluval filters allow great flexibility to satisfy the many requirements of novice and advanced enthusiasts alike. Fluval Canister filters improve the way filter media is employed while at the same time dramatically increasing filtration area. Water must pass through all media before it returns to the aquarium. Instead of travelling in a direct path through the media, the water current in the 4thgeneration Fluval system is actually directed in a complex flow path. This increases the time that water is in contact with Fluval's many filtration media modules. The squared design of the 4thgeneration Fluvals provides 35% to 55% increased volume over traditional round containers while improving the water flow characteristics. Fluval filters support a greater mass of filter material. This increases the life and efficiency of the filter system. Maintenance requirements are reduced. General water purity remains constant. Conventional filters clog more rapidly and do not function as efficiently as Fluval. Fluval's multi-leveled media design forces water into many channels and pathways which increases contact time and thoroughly purifies water. Other filters cannot achieve the same level of water purity. They cannot successfully increase the flow rate to the levels required to compensate for the lack of filter media volume and contact time.... »

En cours...