Notice SONY SAL-18250

« ???? ??G??????????2?????????????????? ??O?????G????G????????? 2 ????????F??d??????t?????T? ?????????????????????????? ?????????????????????G??? ?????G???????????????G?????????? ????????? ????????????????????? ?G???????et???? ????????G?????????????????? ???????????? ???? ??? ???? 35mm? ??????*1 (mm) ??? ?????*1?? ????*2 (m) ?????? (?)???G?????? (mm) ?????? ?????? (mm) ??(g) DT 18- 250mm F3.5-6.3 (SAL18250) 27375131676?6?30?045029F224062?75?86?440 *1 ????35mm???????????????APSCa??????????????sd?????????????????? *2 ???????????????????????????????? ????????????µ????????????????µ???? ???????ADI????ADI????????????T??????????? ?? ????????????????????????????????????G???????????????????????????? ???????1?????O????1??????O????1?????????1??????? ??????????????????????????G???????????? ?????????????? English You will find information on using each lens in this manual. Precautions common to lenses, such as notes on use will be found in “Precautions before using” on a separate sheet. Be sure to read both documents before using the lens. This lens is designed for Sony a mount cameras (models equipped with APS-C sized image sensor). You cannot use on 35mm-format cameras. Notes on use When using this lens with an E-mount camera, attach a separately sold Mount ?? Adaptor. Do not attach the lens directly to the E-mount camera or you may damage both. When you carry the camera with the lens attached, make sure to hold both the ?? camera and the lens steadily. Do not hold by any part of the lens that protrudes when zooming or focusing.?? Precautions for flash use With certain of lens/flash combinations, the lens may partially block the light of the flash, resulting in a shadow at the bottom of the picture. When using a built-in camera flash, make sure to remove the lens hood and shoot from at least 1m (3.3 feet) away from your subject. Vignetting When you use lens, the corners of the screen become darker than the center. To reduce this phenomena (called vignetting), close the aperture by 1 to 2 stops. ? Names of parts 1···Zooming ring 2···Focal-length index 3···Lens contacts 4···Mounting index 5···Focal-length scale 6···Zoom lock switch 7···Distance index 8···Distance scale 9···Focusing ring 10···Lens hood index ? Attaching/detaching the lens To attach the lens (See illustration ?–?.) 1 Remove the rear and front lens caps and the camera body cap. You can attach/detach the front lens cap in two ways, (1) and (2). When you ?? attach/detach the lens cap with the lens hood attached, use method (2). 2 Align the orange index on the lens barrel with the orange index on the camera (mounting index), then insert the lens into the camera mount and rotate it clockwise until it locks. Do not press the lens release button on the camera when mounting the lens.?? Do not mount the lens at an angle.?? To remove the lens (See illustration ?–?.) While pressing and holding the lens release button on the camera, rotate the lens counterclockwise until it stops, then detach the lens. ? Attaching lens hood It is recommended that you use a lens hood to reduce flare and ensure maximum image quality. Align the red line on the lens hood with the red line on the lens (Lens hood index). Turn the hood clockwise until the red line on the lens meets the red dot on the hood and it clicks into place. When using a built-in camera flash, make sure to remove the lens... »