Notice GENERIQUE Hub USB 2.0

« Un indicateur de l'état de marche Les ports en aval possèdent les fonctions connexion automatique, détection de vitesse, protection contre surcharge et récupération automatique. 3. Besoins système Interface USB : un port USB disponible Compatible Windows 98SE/ME/2000/XP et MAC 8.6/9.X/10.X. 4.Installation du driver Windows 98SE: 1) Le système détectera le hub et lancera “Add New Hardware Wizard.” 2) Quand vous voyez l'écran ci-dessous, cliquez sur “Next”. . 3) Cochez la première option et cliquez sur “Next”. 4) Quand vous voyez l'écran ci-dessous, décochez toutes les options et cliquez sur “Next”. 5) A l'écran ci-dessous cliquez sur “Next”. 6) Quand vous voyez l'écran ci-dessous, cliquez sur “Finish”. windows ME/2000/XP: Aucun driver n'est nécessaire 5. Vérification Faîtes un clic-droit sur l'icône "Poste de Travail" sur le bureau. Sélectionnez "Propriétés" puis l'onglet "Matériel" et "Gestionnaire de périphériques". Dans "contrôleurs de bus USB" vous devez voir "Generic USB Hub" (voir ci-dessous). Sinon, merci de refaire la procédure d'installation 6. Contenu de l'emballage Un hub USB 2.0 4 ports Un manuel d'utilisation 6-INBOK----066A Hi-speed USB 2.0 SLIM HUB GU2H-01 GU2H-02 GU2H-03 GU2H-04 User manual 1.Introduction: This USB 2.0 Hi-Speed Hub lets you add more USB 2.0 peripherals to your desktop computer, The hub has 4 downstream ports which will connect either the new USB 2.0 high performance peripherals or the legacy USB 1.1 devices. This means it is fully “backwards compatible” with all your existing USB products. The hub is 100% compliant with the USB 2.0 specifications. The USB 2.0 Hi-Speed Hub will allow users to add multiple higher performance peripherals such as high resolution video conferencing cameras, and next generation of USB 2.0 scanners, printers, and fast storage devices. The hub will allow you to connect up to 127 USB devices to your computer and comes with a USB 2.0 cable. 2.Features: USB-IF certificated,CE & FCC approved. Fully compatible with USB 2.0 Specification Fully backward Compatible with USB 1.1 Specification Support transfer rate of 1.5/12/480 Mbps 500mA each port is reliable at p to 15 feet of transmission Support self-powered mode One upstream port and four downstream ports One LED to indicate the HUB is ready Downstream ports have automatic connect and speed detection function plus Over-current protection with auto recovery 3.System Requriements USB Interface:one free USB port. OS:windows98SE/ME/2000/XP and MAC 8.6/9.X/10.X. 4.Software Installation Windows 98SE: 3) The system will detect the hub and run “Add New Hardware Wizard.” 4) As you see the following screen,press “Next”. . 3) As you see the following screen, please check the first item ans press “Next”. 6) As you see the following screen, please cancel any item and press “Next”. 7) As you see the following screen, please press “Next”. 6) As you see the following screen, please press “Finish”. windows ME/2000/XP: Need no driver installation. 5. Verification As the result of the successful installation, you should meet the following picture after you unfold the item “Unive... »