Notice INFOSEC Z1 Zenergy Cube

« of an extended outage, which gives you enough time to save work in progress and properly switch off the connected loads. 2. MAIN CHARACTERISTICS ? A highly-reliable microprocessor control ? Cold start feature if no power supply ? Off-mode charging ? Automatic restart during AC power recovery ? Compact size. 3. SAFETY INSTRUCTIONS – Security ? Risk of Electric Shock: ? The UPS unit uses potentially hazardous voltages. Do not attempt to disassemble this equipment as it does not contain accessible components that can be repaired by users. ? All repairs should be performed by qualified technicians only. ? The utility power outlet shall be near the equipment and easily accessible. To isolate the UPS from AC input, remove the plug from the utility power outlet. ? The mains outlet that supplies the UPS shall be located near the UPS and shall be easily accessible. ? The UPS has its own internal power supply (battery). There is a risk that output sockets may still be live after the UPS has been disconnected from the mains power supply. ? Install the UPS in a temperature and humidity-controlled indoor area free of conductive interference. ? It should not be exposed to direct sunlight or sources of heat. Do not cover the ventilation slots. ? Disconnect the UPS from AC power before cleaning with a damp cloth (no cleaning products). ? In an emergency situation, switch the UPS to the “Off” position and disconnect the unit from the AC power supply. ? When the UPS is out of order, please refer to “section 9: trouble shooting” and call the hot line. ? Connected products: ? Combined UPS and connected equipment leakage current should not exceed 3,5 mA. INFOSEC UPS SYSTEM - 4, rue de la Rigotière - 44700 Orvault - FRANCE - www.infosec-ups.com Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 06 10 AA 59 204 13 3 ? Make sure that the connected load does not exceed UPS capabilities. To ensure improved backup time and longer battery life, we recommend a load equivalent to 1/3 of nominal power. ? Do not leave any recipients containing liquid on or near the UPS. ? Do not plug the UPS input into its own output socket. ? Do not plug the UPS into a power strip or surge suppressor. ? The UPS has been designed for personal computers. It should not be used with electrical or electronic equipment with inductive loads such as motors or fluorescent lights. ? Do not connect any household appliances such as microwaves, vacuum cleaners, hair dryers or life-support systems to the UPS. ? Due to excessive consumption, laser printers should not be connected to the UPS. ? About batteries: ? It is recommended that a qualified technician change the battery. ? Do not dispose of the battery in a fire as it may explode. ? Do not open or damage the battery. Released electrolyte can be toxic and harmful to the skin and eyes. ? The UPS contains one or two large-capacity batteries. To avoid any danger of electric shock do not open it/them. If a battery needs servicing or has to be replaced, please contact the distributor. ? Servicing should be performed or supervised by competent personnel who take the necessary precautions. Keep unauthorized personnel away from batteries. ? A battery can present a risk of electric shock and cause short circuits. The following precautions should be observed by the qualified te... »