Notice LABTEC Arena 675

Notice LABTEC Arena 675

Mode d'emploi LABTEC Arena 675 disponible.

Groupe d'entraide des utilisateurs LABTEC Arena 675

Bienvenue dans le groupe d'entraide des utilisateurs
LABTEC Arena 675

Arena 675

Le groupe d'entraide LABTEC Arena 675 vous donne des conseils d'utilisation, solutions aux problèmes de fonctionnement, entretien et assistance pour votre Enceinte acoustique. Rejoignez GRATUITEMENT notre groupe d'entraide Arena 675 pour vous aider à mieux utiliser votre Enceinte acoustique LABTEC. Le SAV entre consommateurs donne accès à différents services pour votre LABTEC Arena 675 : accès à la notice Arena 675 et mode d'emploi pdf, manuel d'utilisation en français, avis consommateur et forum actif. Soyez le premier membre actif de ce groupe d'entraide.

LABTEC Arena 675

Dernières actualités du groupe d'entraide LABTEC Arena 675

Nouvelles questions du forum

Nouveaux avis

Nouveaux membres

  • nogopet376  depuis le 13/12/2020 - Expertise (non renseigné) - Utilisateur depuis (non renseigné)
  • Lo74950  depuis le 02/07/2020 - Expertise (non renseigné) - Utilisateur depuis (non renseigné)

Documentation disponible sur votre produit

Notice disponible après inscription gratuite au groupe d'entraide

Manuel/Notice/Mode d'emploi | 101 K | Français

Pas de lien disponible

Pas de vidéo disponible

« plifiers) that produce heat. •Do not defeat the safety purpose of the polarized plug.A polarized plug has two blades with one wider than the other.The wide blade is provided for your safety.If the provided plug does not fit into your outlet,consult an electrician for replacement of the obsolete outlet. •Operate the speakers only from the low level audio line out jack of the computer or of an audio device. •Protect the power cord from being walked on or pinched particularly at plugs,convenience receptacles,and the point where they exit from the apparatus. •Only use attachments/accessories specified by the manufacturer. •For added protection during lightning storms,unplug the speakers from the electrical outlet and turn off the computer. •Unplug this apparatus when unused for long periods of time. •Servicing is required when the apparatus has been damaged in any way,such as when the power-supply cord or plug has been damaged,liquid has been spilled or objects have fallen into the apparatus,the apparatus has been exposed to rain or moisture,does not operate normally,or has been dropped. •Refer all servicing to qualified service personnel. •The speakers should be disconnected from the mains by placing the power/standby switch in the off position and unplugging the power cord of the speakers from the AC mains receptacle. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. IMPORTANT SAFETY INFORMATION CAUTION ELECTRIC SHOCK HAZARD Setting up your Labtec Arena™675, Model: S-0105A/B speakers Satellite speakers Before attaching the cables,position two satellite speakers on either side of your computer monitor about the same dis- tance from each other as from you.Angle them to face you. Place the center channel speaker on your desk in front of your monitor. Place the other satellite speakers behind you and about the same distance apart as the front speakers. Subwoofer Because bass frequencies are non-directional,the sub- woofer can be placed anywhere in relation to the satellites. For optimum sound quality,place the subwoofer on the floor beneath your desk being careful not to block the bass port. Since the subwoofer has a powerful magnetic structure, make sure it is as least 20 inches away from monitors,CPUs, disk drives and magnetic media. Arena675 manual AMR.qxd 5/14/03 9:17 AM Page 2Troubleshooting See below for solutions to common problems.If you have more questions about your Labtec speakers,visit www.labtec.com. Speakers produce weak or no sound. •Is the power light on? Make sure the speakers are plugged into an electrical outlet and the power button is on. •Is there output from the soundcard? Try connecting the speakers to an alternative audio source - for example,a CD player,cassette tape deck,or radio.If there is sound from the speakers,the problem is probably with your soundcard.If no other sound source is available,try removing the plug from the soundcard and turning the speaker to maximum volume.You should hear a hum or buzz when you touch the tip of the plug.If you do,the speaker is OK,and you should check your soundcard setup. One speaker doesn’t produce sound. •Is the soundcard connection secure? Make sure the cable from the soundcard to the main speaker is properly secured. •Is the balance control centered? Specifications •Total RMS Power:26.5 Watts Subwoofer:15 watts RMS into 4 ohms at 100Hz at 10% THD (total h... »

Produits LABTEC les plus consultés

Derniers Produits LABTEC ajoutés

En cours...