Notice ARNOVA 10 G2

« indd 131/10/2011 11:02:452 ??? 1 3 4 5 67 2 1 2 3 4 5 6 78 10 11 109 11 9 8 ENGLISHDESCRIPTION OF THE DEVICE Volume + / Volume - Charging indicator: Red light: battery charging / Green: battery charged. On/Off button: enables to turn on or turn off the device. Headphone jack USB Host port: to connect a keyboard, a mouse or a mass storage USB device. Go on the Home screen, tap on the Menu icon , then select Settings/USB Mode select. If the Host Mode is off, tap on the Host Mode line to turn it on. Important: turn off the Host Mode after use. Micro-USB port: to connect your ARNOVA to your computer, using the included USB cable (to transfer files) Micro-SD card Power connector Microphone Camera Hardware Reset IMPORTANT: Your device is frozen.You can turn it off. Press the ON/OFF button 3 for 10 seconds or press the reset button. See Hardware Reset 9. UserGuide_Arnova_10G2_PN110212_book.indd 231/10/2011 11:03:053 1 2 ?! 1 EUR US UK ENGLISH STARTING UP Installation Wizard The first time you start up your ARNOVA, the installation wizard will bring you through a few screens to help you set up the principal settings: Language, country, time, etc. Before using your ARNOVA for the ?rst time, completely charge the battery! Charging the Battery Connect the supplied power cable to the ARNOVA Power connector and to a wall outlet. The ARNOVA device will turn on and start charging. The Power indicator light is red while the battery is charging. It will turn green when the battery is fully charged. Volume + / Volume - Charging indicator: Red light: battery charging / Green: battery charged. On/Off button: enables to turn on or turn off the device. Headphone jack USB Host port: to connect a keyboard, a mouse or a mass storage USB device. Go on the Home screen, tap on the Menu icon , then select Settings/USB Mode select. If the Host Mode is off, tap on the Host Mode line to turn it on. Important: turn off the Host Mode after use. Micro-USB port: to connect your ARNOVA to your computer, using the included USB cable (to transfer files) Micro-SD card Power connector Microphone Camera UserGuide_Arnova_10G2_PN110212_book.indd 331/10/2011 11:03:244 1 2 3 4 www ENGLISHCONNECTING TO THE WIFI NETWORK For this procedure to work, you need to be in a WiFi zone that will allow you to connect to it. Every time the ARNOVA is in range of a network that you have already configured once, it will attempt to make a connection. * For free access WiFi points, there is no need to enter any special information. For secured networks, you will need either a key (a series of numbers and/or letters) of the type WEP, WPA, or WPA2. To obtain the exact connection parameters required, contact the Internet service provider. To configure a new WiFi network, go on the Home screen, tap Settings . In the Settings screen, select Wireless & networks. If the WiFi is off, tap on the Wi-Fi line to turn it on. Then select Wi-Fi settings. The ARNOVA will scan for available WiFi networks and display them at the bottom of the screen. Tap on the network you want to connect to, enter the required network information* and then tap on Connect. Your ARNOVA will establish a connection to that WiFi hot spot. UserGuide_Arnova_10G2_PN110212_book.indd 431/10/201... »