Notice PHILIPS HF3500-01

« rning hours our eyes are more sensitive to light than when we are awake. During that period the relatively low light levels of a simulated natural sunrise prepare our body for waking up and getting alert. People who use the Wake-up Light wake up more easily, have a better overall mood in the morning and feel more energetic. Because the sensitivity to light differs per person, you can set the light intensity of your Wake-up Light to a level that matches your light sensitivity for an optimal start of the day. For more information about the Wake-up Light, see www.philips.com. General description (Fig. 1) 1 Wake up light 2 Display brightness 3 Volume lower (HF3505 only) 4 Volume higher (HF3505 only) 5 Radio (HF3505 only) 6 FM scan (HF3505 only) 7 Light on/off 8 Alarm on/off 9 Clock time 10 Alarm sound types (HF3505 only) 11 Antenna (HF3505 only) Preparing for use Setting the clock 1 Put the plug in the wall socket. ENGLISH 2 When plugging in, the clock time will automatically start blinking. ,If the clock time does not start blinking, press the clock button on the side of the appliance. ,The clock icon appears on the display. 3 Press the + or - button to set the hour and minutes. Note: You can only do this when you are in the set clock time and when the time indication ?ashes. If this is not the case, press the clock button again, you are now in the set clock time. 4 Press the Clock button to con?rm. You can also wait for 5 seconds before the clock is ?xed. Note: Every time you remove the plug from the wall socket, clock time setting is lost. Using the appliance Functions Below you can ?nd a list of all functions that can be set in this appliance: -Clock time -Time format -Alarm time -Alarm sounds (HF3505 only) -FM (HF3505 only) -Light level -Display brightness You can set these functions in the following way: ENGLISH5Using the light You can use the appliance as a bedside lamp. 1 To switch on the light, press the lamp on/off button. ,The light icon is shown in the display and the current light level 10 appears. 2 Press the + and - buttons to select a light intensity. You can choose a light intensity between 1 and 10. Note: The light intensity you have selected is automatically set as the light intensity level for the alarm as well. 3 To switch off the lamp, press the lamp on/off button again. Note: The light level can be adjusted when light is on/off. Setting time format Switching between 24h and 12h time mode. 1 Press the Clock button for > 2 seconds. When the 12h mode is active, PM or AM will be shown in display. Note: To switch to the 24h mode, press the Clock button again for >2 seconds. Setting the alarm When you set the alarm, you choose an alarm time and (only in case of HF3505) the type of sound you want to wake up to. The alarm is activated when the alarm symbol is visible on the display. The light intensity slowly increases to the selected level during the last 30 minutes before the set alarm time. The sound slowly increases to the selected level after the set alarm time. HF3505 only: Light level range is 1-10, volume level range is 1-10. It is not possible to switch these functions off. HF3500 only: Light level range is 1-10 and there is no volume control for the type of the appliance. The alarm sound volume is ?xed. ENGLISH6 1 Press the alarm button to switch on the alarm. ,The time indication o... »