Notice ARCHOS Arnova 9 G2

« ndd 114/10/2011 16:33:522 ??? 109 13456728 1112 13 ENGLISH 9 DESCRIPTION OF THE DEVICE Microphone Headphone jack Charging indicator: Red light: battery charging / Yellow: battery charged. Micro-SD card slot Hardware Reset Micro-USB port: to connect your ARNOVA to your computer, using the included USB cable (to transfer files) Power connector USB Host port: to connect a keyboard, a mouse or a mass storage USB device. On/Off button: enables to turn on or turn off the device. Home button ESC: back button Menu button Camera IMPORTANT: Your device is frozen.You can turn it off. Press the ON/OFF button for 10 seconds or press the reset button. See Hardware Reset 5. 1 2 3 4 5 6 7 8 1011 9 1312 UserGuide_Arnova_9G2_PN110116_book.indd 214/10/2011 16:34:013 1 2 ?! ENGLISH STARTING UP Installation Wizard The first time you start up your ARNOVA, the installation wizard will bring you through a few screens to help you set up the principal settings: Language, country, time, etc. Before using your ARNOVA for the ?rst time, completely charge the battery! Charging the Battery Connect the supplied power cable to the ARNOVA Power connector and to a wall outlet. The ARNOVA device will turn on and start charging. The Power indicator light is red while the battery is charging. It will turn yellow when the battery is fully charged. Microphone Headphone jack Charging indicator: Red light: battery charging / Yellow: battery charged. Micro-SD card slot Hardware Reset Micro-USB port: to connect your ARNOVA to your computer, using the included USB cable (to transfer files) Power connector USB Host port: to connect a keyboard, a mouse or a mass storage USB device. On/Off button: enables to turn on or turn off the device. Home button ESC: back button Menu button Camera UserGuide_Arnova_9G2_PN110116_book.indd 314/10/2011 16:34:024 1 2 3 4 www ENGLISHCONNECTING TO THE WIFI NETWORK For this procedure to work, you need to be in a WiFi zone that will allow you to connect to it. Every time the ARNOVA is in range of a network that you have already configured once, it will attempt to make a connection. * For free access WiFi points, there is no need to enter any special information. For secured networks, you will need either a key (a series of numbers and/or letters) of the type WEP, WPA, or WPA2. To obtain the exact connection parameters required, contact the Internet service provider. To configure a new WiFi network, go on the Home screen, tap Settings . In the Settings screen, select Wireless & networks. If the WiFi is off, tap on the Wi-Fi line to turn it on. Then select Wi-Fi settings. The ARNOVA will scan for available WiFi networks and display them at the bottom of the screen. Tap on the network you want to connect to, enter the required network information* and then tap on Connect. Your ARNOVA will establish a connection to that WiFi hot spot. UserGuide_Arnova_9G2_PN110116_book.indd 414/10/2011 16:34:045 ? ?? ? ?? ENGLISHTHE ARNOVA INTERFACE Top bar of the Interface (varies according to the screen you are in) Return to the Home screen Return to the previous screen Menu: gives menu options ac- cording to the current screen. Your ARNOVA device is equipped with a capacitive touchscreen. Use your finger pulp to navigate. Status icons: (WiFi connection statu... »