Notice SHARP LC20S4E

« ed) plug incorporating a 3A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or ASA and of the same rating as above, which is also indicated on the pin face of the plug, must be used. Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted. In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the mains plug and fit an appropriate type. DANGER:The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of in a safe manner. Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a serious electric shock may occur. To fit an appropriate plug to the mains lead, follow the instructions below: IMPORTANT:The wires in the mains lead are coloured in accordance with the following code: Blue : NeutralBrown : Live As the colours of the wires in the mains lead of this product may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows; •The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black. •The wire which is coloured brown must be connected to the plug terminal which is marked L or coloured red. Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three-pin plug. Before replacing the plug cover make sure that: •If the new fitted plug contains a fuse, its value is the same as that removed from the cut-off plug. •The cord grip is clamped over the sheath of the mains lead, and not simply over the lead wires. IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN. Unit: mm Dimensional Drawings 100 117 310 482.8 138.9 53.497.6 447 403.1 300.8 293.4 151 475.8 432.5 100 48.2 43.3 224 LC20S4E_Cover1.p6505.8.8, 4:12 PM2Table des matières LC-20S4E TÉLÉVISION COULEUR À ÉCRAN À CRISTAUX LIQUIDES (LCD) FRANÇAIS MODE D’EMPLOI Accessoires fournis..................................................1 Cher client SHARP....................................................2 Précautions de Sécurité Importantes......................2 Préparatifs..................................................................3 Réglage du téléviseur..........................................3 Comment fixer les câbles.....................................3 Pour empêcher une chute du téléviseur LCD......3 Mise en place des piles dans la télécommande...4 Utilisation de la télécommande............................4 Réglage de l’angle...............................................4 Nomenclature des éléments constitutifs de la télécommande.......................5 Nomenclature des éléments constitutifs du téléviseur.....................................6 Raccordement d’appareils externes........................7 Fonctionnement de base..........................................8 Première mise en service.....................................8 Sélection des rubriques du menu........................8 Caractéristiques utiles..............................................9 Réglages de l’image............................................9 Réglages du son..................................................9 Réglages du mode son........................................9 Sélection d’une émission stéréo NICAM et A2.....9 Réglages des caractéristiques..........................10 Chaînes.......... »