Notice TECHNOMATE TM-6900 HD COMBO Super

« parts. This receiver is preinstalled with 25 Satellite and 1500 default Channels and is fully configured. No settings need to be changed. After turning ON the receiver, select a language and Country. You will be taken to the Viewing mode. Press the SATbutton on the Remote and select a satellite. To bring up the Channel List, press the OKbutton on the remote. To delete unwanted Satellites-press the MENUbutton on the remote and go to Installation. Press OKand OK on Satellite Setup. Press OK again and a Satellite List will appear. To delete a Satellite, press the BLUE( ) button on the remote. This receiver is preinstalled with 25 Satellite and 1500 default Channels, and is fully configured.No settings need to be changed. Press the MENUbutton on the remote.Press OKon Installation. Go to Motorised Setting and press OK. Go to the Third line (DiSEqC Motor) and use the Left/Rightarrow buttons on the remote to select USALS. Then go to Position Setting and press OK. Then go to Longitude and Latitude and enter the coordinates of where you live (London’s Longitude is 000. 1 West; South of UK’s Latitude is 51.5 North).Press the EXITbutton on the remote. Go to GOTOand press OK. Wait until the Signal Quality is more than 40% in the progress bar. When a Satellite is found, then all the selected 25 Satellites are fully configured for a Motorised system. If the Signal Quality is below 40%, then the settings are incorrect and the Longitude needs to be adjusted, for example: 000.2, 000.3, 000.4,5/6/7/8/9 Westor East. The Latitude may also need to be adjusted. If you still have not got a signal, then the external installation (dish, etc) needs to be adjusted. Press the MENUbutton on the remote and go to Installation and press OK. Go to Motorised Setting and press OK. Press OKagain to open the satellite list. Select a satellite from the list and press OK. Go to the Third line (DiSEqC Motor) and use the Left/Rightbuttons on the remote to select DiSEqC 1.2. Go to Move and press and hold the Left/Rightbuttons on the remote until you get a Signal Quality of more than 40%. Go to Save and press OK. Press the RED( )button on the remote to Scan. To scan extra satellites, repeat the above. How to Motorise 25 Satellite & 1500 Channels with USALS in 60secs How to Motorise 25 Satellite & 1500 Channels with USALS in 60secs How to Setup a DiSEqC 1.2 Motorised System How to Setup a DiSEqC 1.2 Motorised System If you want to start the receiver without the preinstalled Satellites and Channels, press the MENUbutton on the remote and go to System Settings and press the OKbutton. Go to Factory Reset, press OKand enter 0000. Then select Factory Reset. Press OKand select Yes. How to do a Factory Reset to Delete the Preinstalled Satellites and Channels How to do a Factory Reset to Delete the Preinstalled Satellites and Channels ? 2 High Definition Tuners : DVB-S/DVB-S2 Satellite & DVB-T Terrestrial Compliant (MPEG-?/ MPEG-?/ H.264) *Only available on TM-6900 HDCOMBO ? DVB-S/ DVB-S2 Satellite Compliant (MPEG-?/ MPEG-?/ H.264) ? Output resolution : 576p & 576i, 720p & 1080i ? 1 Smart Card Reader & 2 Common Interfaces (2CI) ? HDMI & Component Output (YPbPr) with Upscaler to Improve Picture Quality ? 10,000 TV & Radio Channels ? USB2.0 PVR Ready via external HDD or USB Flash Drive (memory stick) with Time- shift, Record & Playback functions ? MP3 player and JPEG viewer via external HDD or USB flash Drive (memory... »