Notice SONY HDR-XR520V

« CD screen). Your camcorder starts trying to triangulate. When your camcorder triangulates successfully, it will record the location information at the time movies and photos were recorded. You can identify the GPS switch by the “Operating Guide” supplied. Notes The indicator changes according to the strength of GPS signal reception. Triangulating statusGPS indicatorsGPS reception status Function offNo indicatorThe GPS switch is set to OFF, or the GPS receiver is not functioning normally. DifficultYour camcorder cannot find a GPS signal, therefore, it cannot triangulate. Use your camcorder in an open area. ProcessingYour camcorder is confirming the GPS signal, and will be able to acquire location information soon. Wait until your camcorder completes the triangulation. TriangulatingYour camcorder is receiving a GPS signal, and can acquire location information. TriangulatingYour camcorder is receiving a strong GPS signal, and can acquire location information. The GPS switch is set to ON in the default setting. Movies and photos recorded during triangulation by GPS will be recorded with location information. If you do not want to record location information, set the GPS switch to OFF. It may take from several seconds to several minutes to acquire the location information when you use the GPS for the first time or use it again after long intervals. Even if the camcorder is turned off, the GPS function is working as long as the GPS switch is set to ON. Make sure that the GPS switch is set to OFF during take off and landing of an airplane. You may not be able to acquire location information depending on the strength of GPS reception. When is displayed and it takes a while to triangulate, set the GPS switch to OFF, then set to ON again. ¦ ? ? ? ? ? ? GB4 GB Map Index Where movies and photos were recorded is marked on a map. You can select a movie or photo by recording location. Select the recording media which contains the movie or photo you want to play back before starting this operation. You can use the Map Index only with movies and photos having location information that was recorded with the GPS switch set to ON. You cannot use the Map Index with photos recorded on “Memory Stick PRO Duo” media. ? Press (VIEW IMAGES). The VISUAL INDEX screen appears. ? Touch (VIEW IMAGES) ? [MAP]. Returns to the VISUAL INDEX screen Displays photos ?Previous ?Next ?Scale ?Image marker You can change the scale using the zoom lever or zoom buttons (W: larger, T: smaller). The point you touch on the map scrolls to the center automatically. If you hold a certain point, the map keeps scrolling. will appear at the upper right corner of the thumbnail of the movie or photo without location information. ? ? ? ? ? ? Touch the location marker where you recorded the movies and photos to be played back. The image marker turns red. The movies or photos recorded at that location are displayed on the left of the screen. ? Touch the desired movie or photo. Playback starts from the selected scene. The map always displays the north at the top. When you record several movies and photos at the same location, the movie or photo recorded most recently will be displayed on the LCD screen. You can also display the Map Index screen by touching (HOME) ? (VIEW IMAGES) ? [MAP]. You can also search for the thumbnail of the movie... »